9: Configurable Pin ManagerPremierWave® EN Embedded System on Module User Guide 88To Configure CPM SettingsUsing Web Manager To configure a configurable pin, click CPM in the menu, select CPs and then the desired CPto configure. To configure a CPM Group, click CPM in the menu, select Groups and then the desiredGroup Name to configure.Using the CLI To enter the CPM command level: enable -> cpmUsing XML Include in your file: name=”cp group” instance=”group name”> Include in your file: name=”cp” instance=”cp number”>State Current enable state of the CP group is displayed. Click Enable or Disableto change the state.Value Displays the CP group’s current value or shows “Disabled” if the group isdisabled.Bit Visual display of the bit placeholders for a CP.Level A “+” symbol indicates the CP’s bit position is asserted (the voltage is high).A “-“ indicates the CP voltage is low.I/O Indicates the current status of the pin: I = input O = output = unassignedLogic An “I” indicates the CP output is inverted.Binary Shows the assertion value of the corresponding bit.X = group is disabled or bit is unassigned in groupCP# Shows the configurable pin number and its bit position in the CP group.Add (button) Select to add a specific configurable pin (CP) at a particular bit size, assignthe CP as Input or Output, click Assert Low (if desired), then click the Addbutton to add the particular configurable pin information for the current groupdisplayed in the table. Once added, the information for the configurable pinwill display for this group name.Remove (button) Select to delete a specific configurable pin (CP) and click Remove toremove this pin configuration for the group name displayed in the table.CPM – Groups GroupStatus (continued)Description
