254Function: Read Programm-VersionStartmenu:Command: !vReads the firmware version. Is shown in line 1 on the display.As a response following a command transfer the user receives a sequence in theform e.g. "LAMI-S06/V3.30F1Function: Read Serial Number (Board)Command: y8aReads the serial number of board.As a response following a command transfer the user receives a sequence in theform e.g. "PL13091570B06RLFunction: Read Serial Number (Device)Startmenu:Command: y8bReads the serial number of device. Is shown in line 2 on the display.As a response following a command transfer the user receives a sequence in theform e.g. "PL13091570M02RLF1Function: Tag-InfoCommand: y5Reads the 8-digit tag information.As a response following a command transfer the user receives a sequence in theform e.g. "12345678Function: Storage of MacroMenu:Command: SAll configuration parameters are stored in the EEPROM so that these values arenot lost after the switch-off process. When switching on the laminator the storedsettings are reloaded and reused.The command sequence is acknowledged with “+”.Configuration: System
