LaserLiner HandyLaser Magnum Operating Instructions Manual

1. Vertical vial2. Holder for pentaprism3. Longitudinal vial4. Transverse vial5. Laser beam exit6. Front adjustable foot7. Aligning edge8. Magnetic sole9. Battery compartment10. Rear adjustable foot11. Pin12. Rear adjusting screw13. Prism ejector14. Switch15. Laser mode display16. Plumb beam exit17. Mirror for plumb projection18. Front adjusting screw1 2 3 41714 15 1611107 9 8 765181213Operating Instructions HandyLaser Magnum1. Operation1.1 Batteries2 x 1.5 V alkalimicro-batteries1.2 Fitting the adjustable feetInsert the feet into the grooves asshown.1.3 Aligning the HandyLaser Magnum1. First adjust the transverse vial Q with theadjusting screw on the front adjustable foot.2. Then adjust the longitudinalvial L with the adjusting screwon the rear adjustable foot.Note: Always view the vials directly fromabove to avoid reading errors.2.1.L Q1.4 Switch on - Press the button Impulse Laser TechnologyAfter switching on, the laser is in impulse mode. Byblinking continuously, the laser is much easier to see,for example on rough plaster and coloured surfacesand over bigger distances.Switch onimpulse modeLinearmodeOffswitch1.2.3.

/ 2

Related manuals for LaserLiner HandyLaser Magnum