Laversab 6600 User Manual
                                                                               | |
Contents
| 
50Row 12 (point 10) keeps Pt at 100 knots and ramps Ps to 50,000 feet at 6000 ft/min while Ps2is maintained at 0.300 Dfin.Row 13 (point 11) takes Pt down to 20 knots and ramps Ps1 and Ps2 back to “Ground” at6000 ft/min. Since Ps2 is in Dfin, the actual Dfin target value is 0.000 since both Ps1 and Ps2are achieving the same pressure (Ground).Row 14 (point 12) puts Pt, Ps1 and Ps2 into Measure mode.4.2 CREATING A PROFILE1. Start with opening the “Profile Template.xls” file.2. Do not change anything on Row 1.3. On Row 2, left-most cell, replace “Template” with the name of your profile. Limit is12 characters.4. On Row 2, middle cell, replace “11” with a profile number between 1 and 15 that youwould like this profile to be saved as, in the 6600.5. Do not change row 2 , 3rd cell or 4th cell.6. In rows 3 through 50, change the cells as per the points you want to generate in yourtest. For entering Units and Modes use the drop down menu selections for thosecells. If you do not use all the rows for your profile, select the cells in the unusedrows up to row 50 and delete them, shifting the cells up. DO NOT delete rows 51, 52and 53.7. Format the cells with values so that they show the correct number of digits after thedecimal point. For instance, knots values have 1 digit after the decimal, Mach valueshave 3 digits after the decimal. Format the cell just like a regular Excel cell with anumber. The following table lists the digits after the decimal for the various units.The Rate target value has the same number of digits after decimal as the Ps1 value inthe same units.Pt units Digits afterdecimalPs1 units Digits afterdecimalPs2 units Digits afterdecimalKnots 1 Feet 0 Feet 0Mach 3 Ps inHg 3 Ps inHg 3EPR 3 Meters 1 Meters 1Pt inHg 3 Ps mb 2 Ps mb 2Qc inHg 3 Dfin 3Pt mb 2 Dfmb 2Qc mb 2 knots 1Mph 1 mph 1Kmph 18. Check the values, units and modes in your profile to ensure they are all valid andcorrect. If you going into the Leak mode at any point, then make sure that youachieve that point in Control mode before you actually change to Leak mode. For |
Related manuals for Laversab 6600
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine