Laxxon LX-D10004H User Manual
                                                                                                                                                                                                                  | |
Contents
| 
90Figure 5-105.3.5 NetworkHere is for you to input network information.z IP Version: There are two options: IPv4 (Figure 5-11) and IPv6 (Figure 5-12). Right now, systemsupports these two IP address format and you can access via them.z MAC address: The host in the LAN can get a unique MAC address. It is for you to access in theLAN. It is read-only.z IP address: Here you can use up/down button (ST) or input the corresponding number toinput IP address. Then you can set the corresponding subnet mask the default gateway.z Subnet prefix: The input value ranges from 0 to 128. It is to mark a specified network MACaddress. Usually it includes an organization of multiple-level.z Default gateway: Here you can input the default gateway. Please note system needs tocheck the validity of all IPv6 addresses. The IP address and the default gateway shallbe in the same IP section. That is to say, the specified length of the subnet prefix shallhave the same string.z DHCP: It is to auto search IP. When enable DHCP function, you can not modify IP/Subnetmask /Gateway. These values are from DHCP function. If you have not enabled DHCPfunction, IP/Subnet mask/Gateway display as zero. You need to disable DHCP function toview current IP information. Besides, when PPPoE is operating, you can not modifyIP/Subnet mask /Gateway.z TCP port: Default value is 37777. You can change if necessary.z UDP port: Default value is 37778. You can change if necessary.z HTTP port: Default value is 80.z RTSP port: Default value is 554.Important: System needs to reboot after you changed and saved any setup of the abovefour ports. Please make sure the port values here do not conflict.z Max connection: system support maximal 20 users. 0 means there is no connection limit.z Preferred DNS server: DNS server IP address.z Alternate DNS server: DNS server alternate address.z Transfer mode: Here you can select the priority between fluency/video qualities.z LAN download: System can process the downloaded data first if you enable this function.The download speed is 1.5X or 2.0X of the normal speed. |
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine