1297 WEB CLIENT OPERATIONThere might be slightly difference in the interface due to different series.7.1 Network ConnectionBefore web client operation, please check the following items:z Network connection is rightz DVR and PC network setup is right. Please refer to network setup(main menu->setting->network)z Use order ping ***.***.***.***(* DVR IP address) to check connection is OK or not. Usuallythe return TTL value should be less than 255.z Open the IE and then input DVR IP address.z System can automatically download latest web control and the new version can overwritethe previous one.z If you want to un-install the web control, please run uninstall webrec2.0.bat. Or you can go toC:\Program Files\webrec to remove single folder. Please note, before you un-install, pleaseclose all web pages, otherwise the un-installation might result in error.z Current series product supports various browsers such as Safari, firebox browser, Googlebrowser. Device only support 1-channel monitor on the Apple PC.7.2 LoginOpen IE and input DVR address in the address column. For example, if your DVR IP is10.10.3.16, then please input http:// 10.10.3.16 in IE address column. See X 4 2 8 H 4 2 8 H 4 2 8 H Figure 7-1XFigure 7-1System pops up warning information to ask you whether install webrec.cab control or not. Pleaseclick yes button.If you can’t download the ActiveX file, please modify your settings as follows. See X 4 2 9 H 4 2 9 H 4 2 9 H Figure 7-2X.Input your IPaddress here.
