214367 92 Revision A4.7 Preparing the Bevel GearboxTo prepare the bevel gearbox and check the oil level, follow these steps:1006099Figure 4.24: Driveshield1. Adjust header height and angle so that top of header ishorizontal.2. Open the driveshield.1007271A BFigure 4.25: Bevel Gearbox3. Cut cable ties and remove bags (A) and (B) from thebreather pipe elbows.1013945ABFigure 4.26: Bevel Gearbox4. Remove plug from breather pipe (A) and replace withbreather cap in bag. Discard bag and plug.5. Remove check plug (B) to check oil level. Oil shouldslightly run out when removed.NOTE:If the oil level is low, top up with a 75W90 synthetic gearlubricant with high thermal stability conforming toAPI GL-5 minimum (SAE J2360 preferred)specifications such as Traxon E Synthetic 75W90gear oil.PERFORMING PREDELIVERY CHECKS
