Points of Interest 25Marking Your Position (Personalized)Normally, marking your position is simply a two-button process: MARK and ENTER.However, sometimes you will want to personalize the POI you are marking to make iteasier to identify later. You are able to change the icon, change the name, and createa message. You are also able to change the location coordinates and the elevation.This changes the position that is being saved and is discussed in a following section.1. Press MARK.2. Use the Arrow joystick to highlight the field you want to change.3. Press ENTER.4a. If the icon field was selected: Use the Arrow joystickto select the icon desired and press ENTER. To aid inyour selection, the type of icon selected is displayed inthe information block at the top of the keypad.4b. If the Name field was selected: Use the Arrow joystickto select the character desired and press ENTER. Ifyou make a mistake, highlight Back and press ENTER.To access the lower-case characters, highlight Shiftand press ENTER. To clear everything and start over,highlight CLEAR and press ENTER. When you aresatisfied with the name, highlight OK and press ENTER.Note: User-saved POI names can only be eight characters long (includingspaces).4c. If the Message field was selected: Use the keypad displayed, just as wasdescribed in 4b, to enter a message for this POI. Message fields can haveup to 30 characters, including spaces.5. When the Icon, Name, and Message fields are done, use the Arrow joystick tohighlight Save.6. Press ENTER.Mark Screen with Namefield highlightedMarkCancelCREATE MESSAGE?MessageElevationLocationIcon NameFT92434°06.560N117°49.566WSavePOI003
