Magnavox 19MD301B Owner's Manual

Also see for 22MD311B: Owner's manual Product specifications Manual del propietario Manuel du propriétaire

Magnavox 19MD301B Owner's Manual Manual pdf 16 page image

16WATCHING TVSleep Timercan set the unit to go into standby mode after an incremental period of time.Press SLEEP repeatedly to change the amount of time (increasesthe time by 30 minutes up to 120 minutes). Sleep 120min.Press SLEEP once to call up the display for checking the remaining time.• To cancel sleep timer, press SLEEP repeatedly until [Sleep Off] isdisplayed.Switching Each Input Mode can easily switch with the remote controlbetween TV (ATSC or NTSC) and external devices when they are connected to the unit.Press SOURCE or CH + repeatedly to cycle through the input modes.e.g.) 32MD311B/32MD301B/26MD311B/26MD301BSourceTVVideoComponentHDMI1HDMI2Video Component11.1DTV /TV channel HDMI2 HDMI1(or PC input)• Pressing CH − reverses the direction of the input modes.*These may differ depending on what product you purchased. For example, 22MD311B,19MD311B or 19MD301B will be displayed [HDMI1], [HDMI2] and [PC] instead.Freeze Mode can freeze the image shown on the TV screen for 5 minutes.Press FREEZE to freeze the image.Freeze• The sound output will not be paused.• To cancel freeze mode, press any buttons except .Channel SelectionSelect channels by using CH + / − or the Number buttons.• To select the memorized channels,use CH + / − or the Number buttons.• To select the non-memorized channels,use the Number buttons.11.1To use the Number buttonsATSC- When selecting digital channel 11.1Be sure to press • before entering the subchannel number.NTSC- When selecting cable or analog channel 11Press PREV CH to return to the previously viewed channel.Note • [No Signal] will appear on the TV screen after the subchannelbroadcast is over.• [Audio only program] message will appear on the TV screen, when youreceive only sound signal.