36CONNECTING DEVICESNo supplied cables are used with these connections:• Please purchase the necessary cables at your local store.Before you connect:Be sure other device is connected properly before plugging inthe AC power cord.External Device ConnectionHDMI ConnectionHDMI connection offers the highest picture quality.HDMI (High-Definition Multimedia Interface) transports high definitiondigital video and multi-channel digital audio through a single cable.CHAPTER 15REPEAT A-BTITLE 5Blu-ray / DVD recorderBlu-ray / DVD recorderwith the HDMI output jackwith the HDMI output jackHDMI cableHDMI cableor32”CHAPTER 15REPEAT A-BTITLE 5Blu-ray/DVD recorderBlu-ray/DVD recorderwith the HDMI output jackwith the HDMI output jackHDMI cableHDMI cableHDMI cableHDMI cableoror22”/19”26”HDMI-DVI ConnectionUse an HDMI-DVI conversion cable to connect the unit toexternal video devices equipped with DVI output jack.(Use HDMI 1 Input jack only and Audio L/R below HDMI 1Input jack on rear of TV.)32”STEREOPCMHDMI-DVI conversion cableHDMI-DVI conversion cablecable receiver or satellite boxcable receiver or satellite boxwith the DVI output jackwith the DVI output jackaudio cablesaudio cablesTo HDMI 1 Inputjack onlySTEREOPCMHDMI-DVIHDMI-DVIconversion cableconversion cableHDMI-DVIHDMI-DVIconversion cableconversion cableaudio cablesaudio cablesaudio cablesaudio cablesTo HDMI 1 Inputjack onlyTo HDMI 1 Inputjack only26”cable receiver or satellite boxcable receiver or satellite boxwith the DVI output jackwith the DVI output jack22”/19”Note• Use an HDMI cable with the HDMI logo (a certified HDMI cable).High Speed HDMI cable is recommended for the bettercompatibility.For HDMI connection (use HDMI 1 or 2 Input jack)• The unit accepts 480i, 480p, 720p, 1080i and 1080p 24/60 Hz ofvideo signals, and 32kHz, 44.1kHz and 48kHz of audio signals.• This unit accepts 5.1 channel audio signal (Dolby Digital) and 2channel audio signal (LPCM).• This unit accepts only signals in compliance with EIA861.For HDMI-DVI connection• The unit accepts 480i, 480p, 720p, 1080i and 1080p video signals.• HDMI-DVI connection requires separate audio connections as welland the audio signals are converted from digital to analog.• DVI does not display 480i image which is not in compliance withEIA/CEA-861/861B.