Magnavox 19MD301B Owner's Manual

Also see for 22MD311B: Owner's manual Product specifications Manual del propietario Manuel du propriétaire

Magnavox 19MD301B Owner's Manual Manual pdf 21 page image

21EnglishINTRODUCTION PREPARATION WATCHING TV USING FUNCTIONS OPERATING DVD CONNECTING DEVICES INFORMATIONUSEFUL TIPSChannelBefore you begin:Make sure the unit is connected to antenna or cable.1 Use ▲/▼ to select the item you want to adjust, then pressOK.PictureSoundChannelFeaturesLanguageDVDAutoprogramChannel ListAdd ChannelsAntenna2 Adjust the following items.AutoprogramIf you switch wires (e.g. between antenna and CATV) or if youmove the unit to a different area after the initial setting, or ifyou restore the DTV channels you deleted, it is recommendedto use Autoprogram to perform a new channel search.1 Use ▲/▼ to select [Autoprogram], then press OK.2 Use ▲/▼ to select an appropriate option, then press OK.PictureSoundChannelFeaturesLanguageDVDAutoprogram will rescan all channels.Auto programming may take more than 20minutes to complete.Select your signal source.BackAntennaCableAntennaCable Or ANT.IN• When connected to VHF / UHF antenna, select [Antenna].• When connected to CATV, select [Cable].• [Autoprogram] will begin.Please wait while the system is scanning for channels.Auto programming may take more than 20 minutes to complete.75%Digital channels 10 chAnalog channels 6 chMENUExit• When the scanning and memorizing are completed, thelowest memorized channel will be displayed.Note• After setting [Autoprogram], using CH + / − on the remote controlskips unavailable programs automatically.• If you are not receiving a signal from your cable service, contactthe Cable provider.• If you press or MENU during autoprogram, the setup of TVchannels will be canceled.• Even if [Autoprogram] is completed, the channel setting will belost if the AC power cord is unplugged before the unit goes intostandby mode by pressing .• The PIN code will be required once you set a PIN code in the[Child Lock]. ➠ p.23• If you want to change your PIN code, follow the instruction of[Change PIN]. ➠ p.25Channel ListThe channels selected here can be skipped when selecting thechannels using CH + / −.Those channels can still be selected with the Number buttons.1 Use ▲/▼ to select [Channel List], then press OK.2 Use ▲/▼ to select the channel you want to remove, thenpress OK.PictureSoundChannelFeaturesLanguageDVDHighlight channels forCh Up / Down key selection.DTV 11.1DTV 11.2DTV 11.3Ch Select OK Watch / Skip BACKBack• The channel display for the removed channel darkens.You will not be able to select the channel again usingCH + / −.• To reactivate a removed channel, use ▲/▼ and pressOK. The registered channels are highlighted.• When you remove a main channel, its subchannels areremoved as well.Note• The channel with the [DTV] indicated on the display is ATSC.Otherwise the channel is NTSC.