1 2 34 5 67 8 90 +10+100CLEARREC MODE RECPLAYH GSTOPRETURNMODESELECTDISPLAYCH. VOL.MUTEDISC SET-UPMENUSLOW PAUSETITLESTANDBY-ON OPEN/CLOSEENTERPICTURE/SLEEPTV/VCR• To confirm that a channel hasbeen added or deleted, pressCH. ▲/▼ to see if you can orcannot select the channel.Only memorized/addedchannels can be selected withCH. ▲/▼. Use the Numberbuttons to select deletedchannels.• If you connected an Antennato the TV/VCR/DVD, channels2-69 will be available to add ordelete. If you connected toCable TV, channels 1-125 willbe available.• This function will not operatewhen the unit is in DVDmode.Helpful Hints20 Adding/Deleting ChannelsYou can delete TV channels you no longer receive or seldomwatch. Or, you can add more channels if the TV/VCR/DVDdid not memorize all your favorite channels.● Before you begin, press SELECT to put theTV/VCR/DVD in TV/VCR mode. The red VCR/TVlight will appear.1 Press SET-UP.2 Press ▲ or ▼ to select CHANNEL SET UP.Then, press ENTER.3 Press ▲ or ▼ to select ADD/DELETE CH. (TV)or (CATV) will appear beside ADD/DELETE CH. Thisindicates whether you connected an Antenna (TV) ora Cable TV signal (CATV) to the TV/VCR/DVD. Then,press ENTER. The menu will disappear and a TVchannel will appear. The channel number will appear,along with ADD/DELETE.4 Press ▲ or ▼ until the channel you wish to addor delete appears. You also can use the Numberbuttons or CH. ▲/▼ to choose a channel.5 Press ENTER to add or delete the channel.To add a channel, press ENTER so ADD and thechannel number appear in light blue (teal). To delete achannel, press ENTER so DELETE and the channelnumber appear in light red (purple).To delete another channel, repeat steps 4-5.6 Press SET-UP when you are finished.ADD / DELETE08– CHANNEL SET UP –ADD / DELETE CH (CATV)AUTO CH PROGRAMMINGB– TV/VCR SETUP –TIMER PROGRAMMINGSETTING CLOCKCHANNEL SET UPUSER'S SET UPV-CHIP SET UPLANGUAGE [ENGLISH]CAPTION [OFF]ZERO RETURNTIME SEARCHINDEX SEARCHB2-5 1,6T2221UB_T1201UB_EN1 3/7/06 11:07 AM Page 20