Magnavox 20MC4306 User Manual

Also see for 20MC4306 - Tv/dvd/vcr Combination: Specifications Quick start guide Manual Del Usuario Quick start guide Mode d'emploi

Contents

1 2 34 5 67 8 90 +10+100CLEARREC MODE RECPLAYH GSTOPRETURNMODESELECTDISPLAYCH. VOL.MUTEDISC SET-UPMENUSLOW PAUSETITLESTANDBY-ON OPEN/CLOSEENTERPICTURE/SLEEPTV/VCR24 Setting the Clock (cont’d)4 If you already know your PBS channel number,skip ahead to step 8. If you do not know thechannel number of your PBS station, press ▼ toselect AUTO CLOCK CH SEARCH. Then pressENTER.● The TV/VCR/DVD will search for a channel thatcarries a time signal. Channels that carry the timewill appear at the top of the screen. Use one ofthese channels when you enter your AUTOCLOCK CH at step 9.This may take several minutes. An ‘’_ _” appears inthe lower left corner of the screen when the searchis complete.5 Press SET-UP to remove the AUTO CLOCKCH SEARCH screen.6 Press SET-UP to access the menu again.7 Press ▲ or ▼ to select SETTING CLOCK.Then, press ENTER.8 Press ▼ to select AUTO CLOCK CH,then press ENTER.9 Press { or B until the channel number of yourPBS station appears. Use the channel numberyou found at step 4.– SETTING CLOCK –AUTO CLOCKAUTO CLOCK CH SEARCHAUTO CLOCK CHMANUAL CLOCK SETD.S.T.B[ON][08][OFF]– SETTING CLOCK –AUTO CLOCKAUTO CLOCK CH SEARCHAUTO CLOCK CHMANUAL CLOCK SETD.S.T.B[ON][02][OFF]10 Press SET-UP to remove the menu.11 Press STANDBY-ONy to turn off theTV/VCR/DVD and let the PBS channel updatethe clock.• During the Auto ClockChannel Search, the picturemay be distorted. This isnormal.• If there are no PBS stationsavailable, set AUTO CLOCKto OFF. Set the clock manually.• If the TV/VCR/DVD isconnected to a Cable Box orSatellite Receiver, select thelocal PBS station on the CableBox/Satellite Receiver. Set theTV/VCR/DVD to the outputchannel of the CableBox/Satellite Receiver (03, 04or AUX).Helpful Hints– AUTO CLOCK CH SEARCH –08 10 13– –4,5-6,10Instructions continued from the previous page.7-911T2221UB_T1201UB_EN1 3/7/06 11:07 AM Page 24