19EnglishINTRODUCTION PREPARATION WATCHING TV USING FUNCTIONS OPERATING DVD CONNECTING DEVICES INFORMATIONUSEFUL TIPSChannelBefore you begin:Make sure the unit is connected to antenna or cable.1 Use ▲/▼ to select the item you want to adjust, then pressOK.PictureSoundChannelFeaturesLanguageDVDAutoprogramChannel ListAdd ChannelsAntenna2 Adjust the following items.AutoprogramIf you switch wires (e.g. between antenna and CATV) or if youmove the unit to a different area after the initial setting, or ifyou restore the DTV channels you deleted, it is recommendedto use Autoprogram to perform a new channel search.1 Use ▲/▼ to select [Autoprogram], then press OK.2 Use ▲/▼ to select an appropriate option, then press OK.PictureSoundChannelFeaturesLanguageDVDAutoprogram will rescan all channels.Auto programming may take more than 20minutes to complete.Select your signal source.BackAntennaCableAntennaCable Or ANT.IN• When connected to VHF / UHF antenna, select [Antenna].• When connected to CATV, select [Cable].• [Autoprogram] will begin.Please wait while the system is scanning for channels.Auto programming may take more than 20 minutes to complete.75%Digital channels 10 chAnalog channels 6 chMENUExit• When the scanning and memorizing are completed, thelowest memorized channel will be displayed.Note• After setting [Autoprogram], using CH + / − on the remote controlskips unavailable programs automatically.• If you are not receiving a signal from your cable service, contactthe Cable provider.• If you press or MENU during autoprogram, the setup of TVchannels will be canceled.• Even if [Autoprogram] is completed, the channel setting will belost if the AC power cord is unplugged before the unit goes intostandby mode by pressing .• The PIN code will be required once you set a PIN code in the[Child Lock]. ➠ p.21• If you want to change your PIN code, follow the instruction of[Change PIN]. ➠ p.23Channel ListThe channels selected here can be skipped when selecting thechannels using CH + / −.Those channels can still be selected with the Number buttons.1 Use ▲/▼ to select [Channel List], then press OK.2 Use ▲/▼ to select the channel you want to remove, thenpress OK.PictureSoundChannelFeaturesLanguageDVDHighlight channels forCh Up / Down key selection.DTV 11.1DTV 11.2DTV 11.3Ch Select OK Watch / Skip BACKBack• The channel display for the removed channel darkens.You will not be able to select the channel again usingCH + / −.• To reactivate a removed channel, use ▲/▼ and pressOK. The registered channels are highlighted.• When you remove a main channel, its subchannels areremoved as well.Note• The channel with the [DTV] indicated on the display is ATSC.Otherwise the channel is NTSC.