23EnglishINTRODUCTION PREPARATION WATCHING TV USING FUNCTIONS OPERATING DVD CONNECTING DEVICES INFORMATIONUSEFUL TIPSTo set the sub ratingsAs for TV-MA, TV-14, TV-PG, or TV-Y7, you can further set thesub ratings to block specific elements of programming. To setthe sub ratings, follow the step below.Use ▲/▼ / ◄/► to select the desired rating, then press OKrepeatedly to switch between [View] and [Block].PictureSoundChannelFeaturesLanguageDVDFV V S L DTV-MATV-14TV-PGTV-GTV-Y7TV-YSelect OK View / Block BACKBackSub Rating Category RatingFV Fantasy Violence TV-Y7V Violence TV-MATV-14TV-PGS Sexual SituationL Coarse LanguageD Suggestive Dialog TV-14, TV-PGNote• Blocked sub rating will appear beside the main rating category in[US TV Ratings Lock] menu.• You cannot block a sub rating (D, L, S or V) if the main rating is setto [View].• Changing the category to [Block] or [View] automatically changesall its sub ratings to the same ([Block] or [View]).D. Change PIND. Change PINAlthough the default PIN code (0000) is supplied with the unit,you can set your own PIN code.1 Use ▲/▼ to select [Change PIN], then press OK.2 Press the Number buttons to enter the new 4-digit PINcode.• Enter PIN code again in [Confirm PIN.] entry field.PictureSoundChannelFeaturesLanguageDVD_Enter PIN.Confirm PIN.PIN Code BACKBackNote• Make sure new PIN code and confirm PIN code must be exactlythe same. If they are different, the space is cleared for reentering.• Your PIN code will be erased and returns to the default PIN code(0000) when a power failure occurs.• If you forget the PIN code, unplug the AC power cord then waitfor 10 seconds to plug the AC power cord in again.The unit will restore the PIN code to 0000 as the factory default.fun-Link (HDMI CEC)This function allows you to operate the linked functionsbetween our brand devices with a fun-Link feature and thisunit connecting through an HDMI cable.1 Use ▲/▼ to select [fun-Link (HDMI CEC)], then pressOK.PictureSoundChannelFeaturesLanguageDVDfun-Link ControlAuto Device OffAuto TV OnDevice ListOnOnOn2 Use ▲/▼ to select the desired setting, then press OK.3 Adjust the following items.fun-Link ControlSet the fun-Link [On] or [Off].The following additional settings will be grayed out when youset to [Off].Use ▲/▼ to select the desired setting, then press OK.On Selects if you have connected an external devicethat is compatible with the fun-Link function.Off Disables all fun-Link.Auto Device OffYou can set your device to turn off by interlocking from thisunit’s power.Use ▲/▼ to select the desired setting, then press OK.OnYour connected fun-Link device turns offautomatically when the unit goes into standbymode.Off Your connected fun-Link device stays on even ifthe unit goes into standby mode.Auto TV OnThis unit will turn on detected when the power on signal issent from your connected fun-Link device.Use ▲/▼ to select the desired setting, then press OK.On This unit turns on automatically when you turn onyour connected fun-Link device.Off This unit stays the standby mode even if you turnon your connected fun-Link device.