24Note• Some discs will only allow you to change thesubtitles from the disc menu or pop-up menu.Press [TOP MENU] or [POP MENU / MENU] todisplay the disc menu or pop-up menu.• If 4-digit-language code appears in the subtitlemenu, refer to “Language Code List” on page 45.• If the disc has no subtitle language or subtitlestyle, “Not Available” will be displayed on the TVscreen.• During playback of the secondary video, theprimary subtitle setting is not available exceptwhen there is no subtitle for the secondaryvideo.• If you select a language that has a 3-letter-language code, the code will be displayed everytime you change the subtitle language setting.If you select any other languages, “---” will bedisplayed instead. (Refer to page 45.)Switching Audio SoundtrackWhen playing back video material recorded with2 or more soundtracks (these are often in differentaudio languages or audio formats), you can switchthem during playback.1. During playback, press [AUDIO].2. Use [K/L] to select “Primary” or “Secondary”audio to set, then press [OK].Primary1 ENG Dolby D Multi-ch /3Secondary2 ENG Dolby D+ Multi-ch /3“Primary” : Sets the audio for the primaryvideo.“Secondary” : Sets the audio for thesecondary video.3. Use [K/L] to select your desired audiostream channel.• For “Secondary”, use [s/B] to switchbetween current audio setting and “Off”.4. Press [AUDIO] to exit.1. During playback, press [AUDIO].2. Use [K/L] to select your desired audiostream channel./ 31 ENG Dolby D 3/2.1ch 48k• For audio CD, you can select followingoptions.“Stereo” : Both right and left channels areactive (stereo).“L-ch” : Only left channel is active.“R-ch” : Only right channel is active.3. Press [AUDIO] to exit.Note• The secondary audio will not be output whenthe secondary video is not displayed or when“BD Audio Mode” is set to “HD Audio Output”.(For some BDs, secondary audio will be outputeven when secondary video is off.)• The sound mode cannot be changed duringplayback of discs not recorded in multipleaudio.• Some discs allow changing the audio languagesetting on the disc menu. (Operation variesdepending on the discs. Refer to the manualaccompanying the disc.)• [AUDIO] may not work on some discs withmultiple audio streams or channels (e.g. DVDsthat allow changing audio setting on the discmenu).• If you select a language that has a 3-letter-language code, the code will be displayed everytime you change the audio language setting.If you select any other languages, “---” will bedisplayed instead. (Refer to page 45.)• Audio Language selection cannot be madeduring rapid playback. (Refer to page 21.)• If 4-digit-language code appears in the audiomenu, refer to page 45.• If the disc has no audio language, “NotAvailable” will be displayed on the TV screen.• For DTS-CD (5.1 music disc), selecting audiostreams or channels is not available.Setting the BD Audio ModeThere are 2 options for the “BD Audio Mode”setting; either by setting the output to thesecondary and interactive audio accompanied bythe primary audio or by setting only the primaryaudio. Depending on the setting of the mode,Dolby Digital, Dolby Digital Plus, Dolby TrueHD,DTS, or DTS-HD output changes between multiLPCM and Bitstream.1. In stop mode with BD inserted, press[MODE].2. Use [K/L] to select your desired setting.BD Audio Mode Mix Audio Output“Mix Audio Output”:If it is available, BD-video’s secondary andinteractive audio will be output with theprimary audio.• The secondary audio is the audio for thesecondary video (Director’s comment etc.)and the interactive audio is the audio for theinteractive application (Button click soundsetc.).“HD Audio Output”:Only the primary audio will be output. Set thismode in order to output , Dolby Digital Plus,Dolby TrueHD, or DTS-HD audio of BD throughHDMI connection.