inteleSmart2 Instruction ManualJune 2016Page 34 of 49CAN Configuration sectionThe right section of the Unit Info page allows the user to modify the CAN-bus network communicationsettings.CANThis allows the user to modify the CAN Settings.Source AddressThis is the address that the inteleSmart2 will use as the source address when transmitting messages onthe CAN-bus network.Baud RateThis pull-down menu allows the user to modify the communication speed of the CAN-bus network. Theuser selectable options are 50k, 125k, 250k and 500k.7.4.2 Programming PageSee the RCP User’s Guide for complete details on programming the inteleSmart2 receiver.
