Contents - contact information
- safety information
- battery safety
- Table Of Contents
- Table Of Contents
- Table Of Contents
- Table Of Contents
- Introduction
- How an Inverter/Charger Works
- Features and Benefi ts
- Figure 1-2, Electrical Connection Points
- Figure 1-3, Left Side Features (MS2012, MS2812, MS2024, MS4024, MS4048)
- Figure 1-4, Left Side Features (MS2000 Series)
- Installation
- Figure 2-1, Simplifi ed Installation for Permanent Installations (MS Series)
- Figure 2-2, Simplifi ed Installation for Permanent Installations (MS2000)
- Locating the Inverter
- Mounting the Inverter
- Figure 2-4, MS Dimensions (MS2012, MS2812, MS2024, MS4024, MS4048)
- Figure 2-5, MS Dimensions (MS2000)
- Wiring the Inverter – General Requirements
- DC Wiring
- Figure 2-6, DC and Battery Temperature Sensor Wiring
- DC Wire Sizing
- DC Cable Connections
- Wiring the Battery Bank
- Battery Temperature Sensor Installation and Wiring
- Wiring the Inverter to the Battery Bank
- AC Wiring
- Recommended GFCI (Ground Fault Circuit Interruption) Outlets
- AC Conductor Wiring (MS2012, MS2812, MS2024, MS4024, & MS4048)
- AC Wiring Confi gurations (MS2012, MS2812, MS2024, MS4024, & MS4048)
- Figure 2-11, AC Wiring for Single In – Single Out (30 A) Confi gurations
- Figure 2-12, AC Wiring for Single In – Single Out (60 A) Confi gurations
- Figure 2-13, AC Wiring for Single In – Dual Out Confi gurations
- Figure 2-14, AC Wiring for Dual In – Single Out Confi gurations
- Figure 2-15, AC Wiring for Dual In – Dual Out Confi gurations
- AC Conductor Wiring (MS2000 models)
- AC Wiring Confi guration (MS2000 models)
- Figure 2-16, AC Wiring for MS2000 Models
- Figure 2-17, AC Wiring for MS2000-15B/-20B Models
- Grounding Inverters
- Sizing the Grounding Electrode Conductors
- Figure 2-20, Multiple Connections to DC Ground Rod (Method 2)
- System Bonding Jumper
- Grounding on Boats
- Neutral to Safety Ground Bonding
- Disabling the Neutral-to-Ground Connection
- Inverter Notifi cation Requirements
- Functional Test
- Figure 2-27, AC Voltage Checks
- Operation
- Figure 3-2, Power Flow – Inverter Mode (MS2000 models)
- Standby Mode
- Battery Charging
- Figure 3-7, Automatic 4-Stage Charging Graph
- Transfer Time
- Protection Circuitry Operation
- Inverter Startup
- Factory Default Values
- Inverter Fan Operation
- Maintenance and Troubleshooting
- Troubleshooting
- Resetting the Inverter
- Appendix A – Specifi cations and Optional Equipment
- A-2 Inverter Effi ciency
- A-4 Temperature and Inverter Output
- A-6 Optional Equipment and Accessories
- Appendix B – Battery Information
- B-5 Battery Bank Sizing Worksheet
- B-6 Battery Wiring Confi gurations
- Figure B-4, Battery Bank Wiring Examples (12-volt)
- Figure B-5, Battery Bank Wiring Examples (24-volt)
- Figure B-6, Battery Bank Wiring Examples (48-volt)
- Appendix C – Power Consumption & Output Waveforms
- Appendix D – Inverter/Charger Terminology
- Appendix E – Warranty & Service
|
© 2016 Sensata Technologies Page ixList of TablesTable 2-1, Recommended DC Wire/Overcurrent Device for Rated Use ..................................17Table 2-2, DC Wire Size For Increased Distance ................................................................18Table 2-3, AC Input/Output Wiring Configurations .............................................................25Table 2-4, AC Input/Output Wiring Configurations (MS2000 models)....................................32Table 2-5, AC Grounding Electrode Conductor Sizing .........................................................36Table 2-6, Equipment Grounding Conductor Sizing ............................................................38Table 3-1, Inverter Battery Turn On/Off Levels..................................................................51Table 3-2, Inverter/Charger Default Values ......................................................................53Table 4-1, Basic Troubleshooting .....................................................................................56Table C-1, Typical Appliance Power Consumption ...............................................................68List of Figures (Cont.)Figure B-1, Series Battery Wiring ................................................................................... 64Figure B-2, Parallel Battery Wiring ................................................................................. 64Figure B-3, Series-Parallel Battery Wiring ....................................................................... 64Figure B-4, Battery Bank Wiring Examples (12-volt) ......................................................... 65Figure B-5, Battery Bank Wiring Examples (24-volt) ......................................................... 66Figure B-6, Battery Bank Wiring Examples (48-volt) ......................................................... 67Figure C-1, AC Waveforms ............................................................................................ 68
|
