Maico Ero Scan Pro Operating Instructions Manual

Contents

Maico Ero Scan Pro Operating Instructions Manual Manual pdf 32 page image

Operating Instructions29After loading, check that the paper is straight and advances properly. Tear off any excesspaper by pulling the paper sharply towards you across the serrated tear bar. In the event of ajam or other paper loading problem, release the lit and straighten the paper before closingagain.Pressing the paper feed button when the printer is idle advances the paper. “Double-clicking”the button (pressing and releasing the button twice in quick succession) prints a demo/testmessage showing the printer firmware version and settings.7.4 Connecting the cradle to the PrinterUse the included printer connection cable to connect the cradleto the printer. Connect the appropriate end of the connectioncable into the serial data port at the rear of the printer.Connect the opposite end of the data cable into the printerconnector on the underside of the cradle.Place the two-position button located on the upper right of thetop side of the cradle in the raised position for printer use.