Makita 2012NB Instruction Manual

Also see for 2012NB: Instruction manual Instruction manual Instruction manual Instruction manual Instruction manual

Contents

71mm (3/64”)123003718Grip the magnetic holder and slip the heel of the set plateinto the groove in the drum. Install the blade installationbolts.12345 6003716After tightening all the blade installation bolts lightly andevenly from the center to the outside, tighten themcompletely following the same sequence. Remove themagnetic holders from the set plate.12003717Install the other blade as described above. Rotate thedrum slowly while pressing the lock plate to make surethere is nothing abnormal. Then install the chip cover andthe side cover.CAUTION:• Do not tighten the blade installation bolts withoutthe blade locating lug of the set plate correctlyresting in the groove of the blade. This may causedamage to the blade and potential injury to theoperator.• Do not turn the tool on with the chip cover removed.For standard blades onlyPlace the blade on the blade gauge so that the blade edgeis perfectly flush with the inside of the front rib (A). Placethe set plate on the blade, then gently press the heel of theset plate flush with the back side of the blade gauge (B).Tighten the screws to secure the set plate to the blade.AB123 4004470Slip the heel of the set plate into the groove in the drum.Install the blade installation bolts.12 34004471After tightening all the blade installation bolts tightly andevenly from the center to the outside, tighten themcompletely following the same sequence.132004472Install the other blade as described as above. Rotate thedrum slowly while pressing the lock plate to make surethere is nothing abnormal. Then install the chip cover andthe side cover.CAUTION:• Tighten the blade installation bolts securely wheninstalling the blades.• Do not turn the tool on with the chip cover open.Changing type of bladeThis tool can accept either throw away blades orstandard blades. If you wish to change the type of blade,buy and use the following parts.Changing from standard bladeto throw-away bladeChanging from throw-away bladeto standard bladeSet plate ---------------------- 2 pcs.Throw-away blade (306 mm) --- 2 pcs.Magnetic holder ---------------- 2 pcs.Set plate ------------------ 2 pcs.Pan head screw M 4 x 6 ----- 4 pcs.Standard blade ------------- 2 pcs.Blade gauge ----------------1 pc.0064171. Socket wrench2. Lock plate3. Blade installationbolt1. Set plate2. Groove3. Blade4. Drum1. Screw2. Set plate3. Blade4. Blade gauge1. Socket wrench2. Magneticholders1. Blade installationbolts2. Set plate3. Magnetic holder4. Drum5. Blade6. Claw1. Magnetic holder2. Set plate3. Blade

/ 12

Related manuals for Makita 2012NB

Makita 2012NB Instruction Manual

Makita 2012NB/2 Instruction Manual

This manual is suitable for:

2012NB

manualsdatabase

Your AI-powered manual search engine