Makita AN923 Instruction Manual

Also see for AN923: Instruction manual Instruction manual Parts Breakdown Instruction manual Instruction manual

Contents

Makita AN923 Instruction Manual Manual pdf 6 page image

6011695Load nails so that they get parallel to the driver guide.1007008Pull the pusher lever to the rear to engage the pusher tothe last nail.Unloading the nailer312007009Pull the pusher lever to the rear. Return the pusher leverback while keeping the pusher depressed to disengage itfrom the strip of nails.Depress the nail stopper and remove the strip of nailsfrom the magazine.1007010Connecting the air hose1 2007011Lock the trigger. Slip the air socket of the air hose ontothe air fitting on the nailer. Be sure that the air socketlocks firmly into position when installed onto the air fitting.A hose coupling must be installed on or near the tool insuch a way that the pressure reservoir will discharge atthe time the air supply coupling is disconnected.OPERATIONCAUTION:• Make sure all safety systems are in working orderbefore operation.1. To drive a nail, you may place the contact elementagainst the workpiece and pull the trigger, or100701220070132. Pull the trigger first and then place the contactelement against the workpiece.• No. 1 method is for intermittent nailing, when youwish to drive a nail carefully and very accurately.No. 2 method is for continuous nailing.CAUTION:• However when the tool is set to the "IntermittentNailing" mode, WITH THE TRIGGER HELD IN AHALF-PULLED POSITION, an unexpected nailing1. Air socket2. Air fitting1. Nail stopper1. Pusher lever2. Depress3. Return1. Pusher