Makita BTD136 Technical Information

Also see for BTD136: Instruction manual Instruction manual Instruction manual

Contents

P 5/13R epair[3] DISASSEMBLY/ASSEMBLY[3] -1. Hammer Case SectionASSEMBLING(3) Assemble Bumper to the machine. (Fig. 10)Fig. 10Fig. 11inner projectionHammer case coverinner projectioninner notchholeholeclawBumperMount Bumper to Hammer case coverby engaging four inner projectionswith four corresponding holes,and two inner notcheswith two corresponding claws.(1) Remove Bumper and Hammer case cover. Then, after removing Housing (R), separate Motor section from Hammercase section. (Figs. 2 and 3)(2) Rotor can give damage on the coil of Stator complete when pulling it off from Stator complete because Rotor attractsStator complete with its very strong magnetic force.Therefore, Rotor must be removed from Stator complete as drawn in Fig. 11 to protect Stator complete from damage.[3] -2. RotorDISASSEMBLING1. Put the Motor section on a workbench so that the drive end of Rotortouches the work bench. Then separate Stator complete from Rotorby pulling it down towards the workbench.2. Separate Baffle plate fromStator complete.Stator complete Stator completeBaffle plateRotorclawCaution for Handling of RotorWhen handling or storing multiple Rotors, be sure to keep a proper distance between Rotors as shown in Fig. 12.Because Rotor is a strong magnet, failure to follow this instruction could result in:Finger injury caused by pinching between Rotors pulling each otherMagnetic loss of Rotors or damage on the magnet portion of Rotor. (Fig. 13)Fig. 12 Fig. 13* Magnetic loss of Rotors* Damage on the magnet portion of Rotor