Makita CT233R Instruction Manual

2 ENGLISHENGLISH (Original instructions)SPECIFICATIONSModel: FD09 FD10Drilling capacities Steel 10 mm (3/8")Wood 21 mm (13/16")Fastening capacities Wood screw 5.1 mm x 63 mm (7/32" x 2-1/2")Machine screw M6 (1/4")No load speed (RPM) High (2) 0 - 1,700 /minLow (1) 0 - 450 /minOverall length 179 mm (7") 149 mm (5-7/8")Rated voltage D.C. 10.8 V - 12 V maxNet weight 1.1 - 1.2 kg (2.4 - 2.7 lbs) 0.93 - 1.1 kg (2.1 - 2.4 lbs)• Due to our continuing program of research and development, the specifications herein are subject to changewithout notice.• Specifications may differ from country to country.• The weight may differ depending on the attachment(s), including the battery cartridge. The lightest and heavi-est combination, according to EPTA-Procedure 01/2014, are shown in the table.Applicable battery cartridge and chargerBattery cartridge BL1016 / BL1021B / BL1041BCharger DC10SB / DC10WD / DC18RE• Some of the battery cartridges and chargers listed above may not be available depending on your region ofresidence.WARNING: Only use the battery cartridges and chargers listed above. Use of any other battery cartridgesand chargers may cause injury and/or fire.SAFETY WARNINGSGeneral power tool safety warningsWARNING: Read all safety warnings, instruc-tions, illustrations and specifications provided with thispower tool. Failure to follow all instructions listed belowmay result in electric shock, fire and/or serious injury.Save all warnings and instruc-tions for future reference.The term "power tool" in the warnings refers to yourmains-operated (corded) power tool or battery-operated(cordless) power tool.Work area safety1. Keep work area clean and well lit. Cluttered ordark areas invite accidents.2. Do not operate power tools in explosive atmo-spheres, such as in the presence of flammableliquids, gases or dust. Power tools create sparkswhich may ignite the dust or fumes.3. Keep children and bystanders away whileoperating a power tool. Distractions can causeyou to lose control.Electrical Safety1. Power tool plugs must match the outlet. Nevermodify the plug in any way. Do not use anyadapter plugs with earthed (grounded) powertools. Unmodified plugs and matching outlets willreduce risk of electric shock.2. Avoid body contact with earthed or groundedsurfaces, such as pipes, radiators, ranges andrefrigerators. There is an increased risk of elec-tric shock if your body is earthed or grounded.3. Do not expose power tools to rain or wet con-ditions. Water entering a power tool will increasethe risk of electric shock.4. Do not abuse the cord. Never use the cord forcarrying, pulling or unplugging the power tool.Keep cord away from heat, oil, sharp edgesor moving parts. Damaged or entangled cordsincrease the risk of electric shock.5. When operating a power tool outdoors, use anextension cord suitable for outdoor use. Use ofa cord suitable for outdoor use reduces the risk ofelectric shock.6. If operating a power tool in a damp location isunavoidable, use a ground fault circuit inter-rupter (GFCI) protected supply. Use of a GFCIreduces the risk of electric shock.