Makita DHG180 Instruction Manual

Also see for DHG180: Instruction manual Instruction manual Instruction manual Instruction manual Instruction manual

6 ENGLISH5. Do not overreach. Keep proper footing andbalance at all times. This enables better controlof the power tool in unexpected situations.6. Dress properly. Do not wear loose clothing orjewellery. Keep your hair and clothing awayfrom moving parts. Loose clothes, jewellery orlong hair can be caught in moving parts.7. If devices are provided for the connection ofdust extraction and collection facilities, ensurethese are connected and properly used. Use ofdust collection can reduce dust-related hazards.8. Do not let familiarity gained from frequent useof tools allow you to become complacent andignore tool safety principles. A careless action cancause severe injury within a fraction of a second.9. Always wear protective goggles to protectyour eyes from injury when using power tools.The goggles must comply with ANSI Z87.1 inthe USA, EN 166 in Europe, or AS/NZS 1336in Australia/New Zealand. In Australia/NewZealand, it is legally required to wear a faceshield to protect your face, too.It is an employer's responsibility to enforcethe use of appropriate safety protective equip-ments by the tool operators and by other per-sons in the immediate working area.Power tool use and care1. Do not force the power tool. Use the correctpower tool for your application. The correctpower tool will do the job better and safer at therate for which it was designed.2. Do not use the power tool if the switch does not turnit on and off. Any power tool that cannot be controlledwith the switch is dangerous and must be repaired.3. Disconnect the plug from the power sourceand/or remove the battery pack, if detachable,from the power tool before making any adjust-ments, changing accessories, or storing powertools. Such preventive safety measures reducethe risk of starting the power tool accidentally.4. Store idle power tools out of the reach of children anddo not allow persons unfamiliar with the power toolor these instructions to operate the power tool. Powertools are dangerous in the hands of untrained users.5. Maintain power tools and accessories. Check formisalignment or binding of moving parts, break-age of parts and any other condition that mayaffect the power tool’s operation. If damaged, havethe power tool repaired before use. Many accidentsare caused by poorly maintained power tools.6. Keep cutting tools sharp and clean. Properlymaintained cutting tools with sharp cutting edgesare less likely to bind and are easier to control.7. Use the power tool, accessories and tool bitsetc. in accordance with these instructions, tak-ing into account the working conditions andthe work to be performed. Use of the power toolfor operations different from those intended couldresult in a hazardous situation.8. Keep handles and grasping surfaces dry,clean and free from oil and grease. Slipperyhandles and grasping surfaces do not allow forsafe handling and control of the tool in unexpectedsituations.9. When using the tool, do not wear cloth workgloves which may be entangled. The entangle-ment of cloth work gloves in the moving parts mayresult in personal injury.Battery tool use and care1. Recharge only with the charger specified bythe manufacturer. A charger that is suitable forone type of battery pack may create a risk of firewhen used with another battery pack.2. Use power tools only with specifically desig-nated battery packs. Use of any other batterypacks may create a risk of injury and fire.3. When battery pack is not in use, keep it awayfrom other metal objects, like paper clips,coins, keys, nails, screws or other small metalobjects, that can make a connection from oneterminal to another. Shorting the battery termi-nals together may cause burns or a fire.4. Under abusive conditions, liquid may beejected from the battery; avoid contact. If con-tact accidentally occurs, flush with water. Ifliquid contacts eyes, additionally seek medicalhelp. Liquid ejected from the battery may causeirritation or burns.5. Do not use a battery pack or tool that is dam-aged or modified. Damaged or modified batteriesmay exhibit unpredictable behaviour resulting infire, explosion or risk of injury.6. Do not expose a battery pack or tool to fire orexcessive temperature. Exposure to fire or tem-perature above 130 °C may cause explosion.7. Follow all charging instructions and do notcharge the battery pack or tool outside thetemperature range specified in the instruc-tions. Charging improperly or at temperaturesoutside the specified range may damage thebattery and increase the risk of fire.Service1. Have your power tool serviced by a qualifiedrepair person using only identical replacementparts. This will ensure that the safety of the powertool is maintained.2. Never service damaged battery packs. Serviceof battery packs should only be performed by themanufacturer or authorized service providers.3. Follow instruction for lubricating and chang-ing accessories.