Makita DHG180 Instruction Manual

Also see for DHG180: Instruction manual Instruction manual Instruction manual Instruction manual Instruction manual

8 ENGLISH14. During and after use, the battery cartridge maytake on heat which can cause burns or lowtemperature burns. Pay attention to the han-dling of hot battery cartridges.15. Do not touch the terminal of the tool imme-diately after use as it may get hot enough tocause burns.16. Do not allow chips, dust, or soil stuck into theterminals, holes, and grooves of the batterycartridge. It may cause heating, catching fire,burst and malfunction of the tool or battery car-tridge, resulting in burns or personal injury.17. Unless the tool supports the use nearhigh-voltage electrical power lines, do not usethe battery cartridge near high-voltage electri-cal power lines. It may result in a malfunction orbreakdown of the tool or battery cartridge.18. Keep the battery away from children.SAVE THESE INSTRUCTIONS.CAUTION: Only use genuine Makita batteries.Use of non-genuine Makita batteries, or batteries thathave been altered, may result in the battery burstingcausing fires, personal injury and damage. It willalso void the Makita warranty for the Makita tool andcharger.Tips for maintaining maximumbattery life1. Charge the battery cartridge before completelydischarged. Always stop tool operation andcharge the battery cartridge when you noticeless tool power.2. Never recharge a fully charged battery car-tridge. Overcharging shortens the batteryservice life.3. Charge the battery cartridge with room tem-perature at 10 °C - 40 °C (50 °F - 104 °F). Leta hot battery cartridge cool down beforecharging it.4. When not using the battery cartridge, removeit from the tool or the charger.5. Charge the battery cartridge if you do not useit for a long period (more than six months).PACKAGE CONTENTLISTCheck that the items listed below are included in thepackage.• 1 Cordless Heat gun• 1 Set of accessories (Some accessories may notbe necessary depending on your purpose.)• 1 Instruction manualNOTE: When parts are missing or damaged, pleasecontact your dealer.PARTS DESCRIPTION► Fig.11 Heating nozzle 2 Front cover3 Lock off lever 4 Switch trigger5 Lock on button 6 LED light7 Hook 8 Hook release button9 Air volume switch (1/2) 10 Temperature dialASSEMBLYAttaching and detachingaccessoriesThe heat gun can use with accessory or without theaccessories according to various of heating purpose.Attaching the accessory— Choose the appropriate nozzle according to theheating applications.— Push the fitting end of the nozzle onto the heatingnozzle.MOUNTING THE CORRECTACCESSORY (IF APPLICABLE)Shape anddescriptionExampleGlass protectionnozzleProtect windowswhen strippingframesDrying the putty on the window flameRemoving putty from the window framewith the scraper (optional accessory)Wide-slot nozzleFor heating spreadover wider areaHeat packaging for heat shrink filmsReflector nozzle Heat shrinking for heat shrink tubesBending of resin tube