Makita DTD148 Technical Product Information

Also see for DTD148: Instruction manual Instruction manual Instruction manual Instruction manual Instruction manual

[3] DISASSEMBLY/ASSEMBLY[3] -2. RotorFig. 91. Put the Motor section on a workbench so that the drive end of Rotor touches the workbench.Then separate Stator complete from Rotor by pulling it down towards the workbench.Stator completeRotor(1) Remove Bumper and Hammer case cover. Then, after removing Housing (R), separate Motor section from Hammercase section. (Fig. 2)(2) Rotor can give damage on the coil of Stator complete when pulling it off from Stator complete because Rotor attractsStator complete with its very strong magnetic force.Therefore, Rotor must be removed from Stator complete as drawn in Fig. 9 to protect Stator complete from damage.DISASSEMBLINGCaution for Handling of RotorWhen handling or storing multiple Rotors, be sure to keep a proper distance between Rotors as shown in Fig. 10.Because Rotor is a strong magnet, failure to follow this instruction could result in:Finger injury caused by pinching between Rotors pulling each otherMagnetic loss of Rotors or damage on the magnet portion of Rotor. (Fig. 11)Fig. 10 Fig. 11Wrong* Magnetic loss of Rotors* Damage on the magnet portion of RotorR epairP 6/ 14