Makita DTD171 Instruction Manual
Also see for DTD171: Instruction manualInstruction manualInstruction manualInstruction manualInstruction manual
                                                                                                    | |
10 ENGLISHChanging assist type ''use application modes for driving screws with good control. .| > one minute after releasing the switch trigger or press-ing the button , , or the quick mode-switchingbutton.[Fig.10: 1. ButtonApplication mode(Assist type displayedon panel)Maximum blows Feature PurposeWood mode *1 3,800 min-1 (/min) This mode helps to prevent a screw from falling atthe beginning of driving. The tool drives a screw ' &to impact, the rotation speed increases and reachesthe maximum speed.Tightening long screws.Bolt mode (reverse rota-tion auto stop) *1 *23,800 min-1 (/min) This mode helps to prevent a bolt from falling off.When loosening a bolt with the tool driving in coun- G after the bolt/nut gets enough loosened. The strokeof the switch trigger to reach maximum speed willbecome short in this mode.Loosening bolts.T mode (1) *1 –(The tool stops rotatingsoon after impact starts.)This mode helps to prevent the screws fromover-tightening. It also accomplishes quick oper- drives a screw with high-speed rotation and stopssoon after the tool starts to impact.NOTE:The timing to stop the driving varies dependingon the type of the screw and material to bedriven. Make a test driving before using thismode.Driving self-drillingscrews to a thin metal T mode (2) *1 2,600 min-1 (/min) This mode helps to prevent the screws frombreakage and stripping. It also accomplishes quick drives a screw with high-speed rotation and slowsdown the rotation when the tool starts to impact.NOTE:Release the switch trigger as soon as the tight-/! !] Driving self-drillingscrews to a thick metal ~<+& G ~+ G G NOTE: When none of the lamp on the panel is lit, pull the switch trigger once before pressing the button .NOTE:& G > Quick mode-switching functionWhat you can do with the quick mode-switching functionThe quick mode-switching function saves the time for changing | \ G' button. It is helpful when doing a repetitive work which requires EXAMPLEY G >impact force, register the max impact force for quick' > G\ G' & \ G' Even if the tool is in other application mode than Tmode, pressing the quick mode-switching button > Y \ You can choose one of following application modes forquick mode-switching function:Impact force• Max• Hard• Medium• SoftAssist type• Wood mode• Bolt mode• T mode (1)• T mode (2)Registering application mode \ G' desired application mode to the tool beforehand.1. With the button or application mode. |
Related manuals for Makita DTD171
Makita DTD171 Instruction Manual
Makita DTD171 Instruction Manual
Makita DTD171 Instruction Manual
Makita DTD171 Instruction Manual
Makita DTD171 Instruction Manual
Makita DTD171 Instruction Manual
Makita DTD171Z Instruction Manual
Makita DTD172 Instruction Manual
Makita DTD172 Instruction Manual
Makita DTD170 Instruction Manual
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine