3410. Extract from the spare parts list (Fig. 76)Use only original MAKITA parts. For repairs andreplacement of other parts, see your MAKITA service center.EA3200S, EA3201SEA3202S, EA3203SSpare partsPos. Qty. Denomination1 1 Sprocket nose bar 3/8”, 30 cm, 1.3 mm (12”)1 Sprocket nose bar 3/8”, 35 cm, 1.3 mm (14”)1 Sprocket nose bar 3/8”, 40 cm, 1.3 mm (16”)2 1 Saw chain 3/8” for 30 cm, 1.3 mm1 Saw chain 3/8” for 35 cm, 1.3 mm1 Saw chain 3/8” for 40 cm, 1.3 mm1 1 Sprocket nose bar 3/8”, 30 cm, 1.1 mm (12”)1 Sprocket nose bar 3/8”, 35 cm, 1.1 mm (14”)2 1 Saw chain 3/8” for 30 cm, 1.1 mm1 Saw chain 3/8” for 35 cm, 1.1 mm1 1 Sprocket nose bar 3/8”, 30 cm, 1.3 mm (12”)1 Sprocket nose bar 3/8”, 35 cm, 1.3 mm (14”)1 Sprocket nose bar 3/8”, 40 cm, 1.3 mm (16”)2 1 Saw chain 3/8” for 30 cm, 1.3 mm1 Saw chain 3/8” for 35 cm, 1.3 mm1 Saw chain 3/8” for 40 cm, 1.3 mm1 1 Sprocket nose bar 3/8”, 30 cm, 1.1 mm (12”)1 Sprocket nose bar 3/8”, 35 cm, 1.1 mm (14”)2 1 Saw chain 3/8” for 30 cm, 1.1 mm1 Saw chain 3/8” for 35 cm, 1.1 mm3 1 Chain protector for 30‑35 cm (3/8”)1 Chain protector for 40 cm (3/8”)4 1 Universal wrench SW 16/136 1 Carburetor screwdriver7 1 Suction head8 1 Fuel tank cap, cpl.9 1 O‑Ring 29.3 x 3.6 mm10 1 Return spring pack, complete11 1 Spring12 1 Driver13 1 Starter cable 3.0 x 900 mm14 1 Spark plug15 1 Oil tank cap, cpl.16 1 O‑Ring 29.3 x 3.6 mm17 1 Air filter18 1 Sprocket guard, cpl.1 Sprocket guard (with fast tensioner), complete19 2 Hexagonal nut M820 1 Clutch drum cpl. 3/8”, 6‑tooth21 1 Shim washer22 1 Circlip23 1 Spark arrester screenAccessories (not delivered with the petrol chain saw)25 1 Chain gauge26 1 File handle27 1 Round file, dia. 4.5 mm28 1 Round file, dia. 4.0 mm29 1 Flat file30 1 File holder (with round file dia. 4.5 mm)31 1 File holder (with round file dia. 4.0 mm)32 1 Offset screwdriver‑ 1 Combined can(for 5l fuel, 3l chain oil)