Makita ER2550LH Original Instruction Manual

4– Start the Petrol String Trimmer only in accordance with the instructions.– Do not use any other methods for starting the engine!– Use the Petrol String Trimmer and the tools only for such applications asspecified.– Only start the engine, after the entire assembly is done. Operation of thedevice is only permitted after all the appropriate accessories are attached!– Before starting make sure that the cutting attachment has no contact withhard objects such as branches, stones etc. as the cutting attachment willrevolve when starting.– The engine is to be switched off immediately in case of any engine problems.– Should the cutting attachment hit stones or other hard objects, immediatelyswitch off the engine and inspect the cutting attachment.– Inspect the cutting attachment at short regular intervals for damage (detectionof hairline cracks by means of tapping-noise test).– If the equipment gets heavy impact or fall, check the condition beforecontinuing work. Check the fuel system for fuel leakage and the controlsand safety devices for malfunction. If there is any damage or doubt, ask ourauthorized service center for the inspection and repair.– During operation always hold the Petrol String Trimmer with both hands.Never hold the Petrol String Trimmer with one hand during use.Always ensure a safe footing.– Operate the equipment in such a manner as to avoid inhalation of the exhaustgases. Never run the engine in enclosed rooms (risk of gas poisoning).Carbon monoxide is an odorless gas.– Switch off the engine when resting and when leaving the equipmentunattended, and place it in a safe location to prevent danger to others ordamage to the machine.– Never put the hot Petrol String Trimmer onto dry grass or onto anycombustible materials.– Always install the approved cutting attachment guard onto the equipmentbefore starting the engine. Otherwise contact with the cutting attachment maycause serious injury.– All protective installations and guards supplied with the machine must beused during operation.– Never operate the engine with faulty exhaust muffler.– Shut off the engine during transport.– Ensure safe position of the equipment during car transportation to avoid fuelleakage.– When transporting, ensure that the fuel tank is completely empty.– When unloading the equipment from the truck, never drop the Engine to theground or this may severely damage the fuel tank.– Except in case of emergency, never drop or cast the equipment to the groundor this may severely damage the equipment.– Remember to lift the entire equipment from the ground when moving theequipment. Dragging the fuel tank is highly dangerous and will cause damageand leakage of fuel, possibly causing fire.Refueling– Shut off the engine during refueling, keep away from open flames and do notsmoke.– Avoid skin contact with mineral oil products. Do not inhale fuel vapor. Alwayswear protective gloves during refueling. Change and clean protective clothingat regular intervals.– Take care not to spill either fuel or oil in order to prevent soil contamination(environmental protection). Clean the Petrol String Trimmer immediately afterfuel has been spilt.– Avoid any fuel contact with your clothing. Change your clothing instantly iffuel has been spilt on it (to prevent clothing catching fire).– Inspect the fuel cap at regular intervals making sure that it can be securelyfastened and does not leak.– Carefully tighten the fuel tank cap. Change location to start the engine (atleast 3 meters away from the place of refueling).– Never refuel in closed rooms. Fuel vapors accumulate at ground lever (risk ofexplosions).– Only transport and store fuel in approved containers. Make sure the fuelstored is not accessible to children.• Resting• Transport• Refueling• Maintenance• Tool replacement3 meters