Makita JV002G Instruction Manual

Also see for JV002G: Instruction manual Instruction manual Instruction manual

10 ENGLISHTo remove the jig saw blade, open the tool openerforward as far as it will go. This allows the jig saw bladeto be released.213Fig.9► 1. Jig saw blade holder 2. Tool opener 3. Jig sawbladeNOTE: In case that it is difficult to remove the jig sawblade:Turn the cutting action changing lever to the position"III" and slightly switch on the tool several times sothat the jig saw blade holder moves to the bottom.Make sure the jig saw blade clamp lever is in the fixedposition when switch on the tool.Remove the battery cartridge from the tool beforeinstalling or removing the jig saw blade.NOTE: Occasionally lubricate the roller.Hex wrench storageWhen not in use, store the hex wrench as shown in thefigure to keep it from being lost.12Fig.10► 1. Base 2. Hex wrenchCover plateUse the cover plate when cutting decorative veneers,plastics, etc. It protects sensitive or delicate surfacesfrom damage. Fit it on the bottom of the tool base.12Fig.11► 1. Cover plate 2. BaseAnti-splintering deviceCAUTION: The anti-splintering device cannotbe used when making bevel cuts.For splinter-free cuts, the anti-splintering device canbe used. To install the anti-splintering device, move thetool base all the way forward and fit it from the bottomof tool base.When you use the cover plate, install the anti-splinteringdevice onto the cover plate.12Fig.12► 1. Base 2. Anti-splintering device