Makita LS1013 Instruction Manual

Also see for LS1013: Instruction manual Instruction manual Parts Breakdown Instruction manual Instruction manual

Contents

9ENG102-3NoiseThe typical A-weighted noise level determined accordingto EN61029:Sound pressure level (LpA) : 88 dB(A)Sound power level (LWA) : 101 dB(A)Uncertainty (K) : 3 dB(A)Wear ear protection ENG238-1VibrationThe vibration emission value determined according toEN61029 :Vibration emission (ah ) : 2.5 m/s 2 or lessUncertainty (K) : 1.5 m/s 2ENG901-1• The declared vibration emission value has beenmeasured in accordance with the standard testmethod and may be used for comparing one toolwith another.• The declared vibration emission value may also beused in a preliminary assessment of exposure.WARNING:• The vibration emission during actual use of thepower tool can differ from the declared emissionvalue depending on the ways in which the tool isused.• Be sure to identify safety measures to protect theoperator that are based on an estimation ofexposure in the actual conditions of use (takingaccount of all parts of the operating cycle such asthe times when the tool is switched off and when itis running idle in addition to the trigger time).ENH003-11For European countries onlyEC Declaration of ConformityWe Makita Corporation as the responsiblemanufacturer declare that the following Makitamachine(s):Designation of Machine:Slide Compound SawModel No./ Type: LS1013, LS1013F,LS1013L,LS1013FLare of series production andConforms to the following European Directives:98/37/EC until 28th December 2009 and then with2006/42/EC from 29th December 2009And are manufactured in accordance with the followingstandards or standardised documents:EN61029The technical documentation is kept by our authorisedrepresentative in Europe who is:Makita International Europe Ltd,Michigan, Drive, Tongwell,Milton Keynes, MK15 8JD, England30th January 2009000230Tomoyasu KatoDirectorMakita Corporation3-11-8, Sumiyoshi-cho,Anjo, Aichi, JAPANGEA010-1General Power Tool SafetyWarningsWARNING Read all safety warnings and allinstructions. Failure to follow the warnings andinstructions may result in electric shock, fire and/orserious injury.Save all warnings and instructions forfuture reference. ENB034-3ADDITIONAL SAFETY RULESFOR TOOL1. Wear eye protection.2. Keep hands out of path of saw blade. Avoidcontact with any coasting blade. It can stillcause severe injury.3. Do not operate saw without guards in place.Check blade guard for proper closing beforeeach use. Do not operate saw if blade guarddoes not move freely and close instantly.Never clamp or tie the blade guard into theopen position.4. Do not perform any operation freehand. Theworkpiece must be secured firmly against the turn baseand guide fence with the vise during all operations.Never use your hand to secure the workpiece.5. Never reach around saw blade.6. Turn off tool and wait for saw blade to stopbefore moving workpiece or changingsettings.7. Unplug tool before changing blade orservicing.8. Always secure all moving portions beforecarrying the tool.9. Stopper pin which locks the cutter head downis for carrying and storage purposes only andnot for any cutting operations.10. Do not use the tool in the presence of flammableliquids or gases.11. Check the blade carefully for cracks or damagebefore operation.Replace cracked or damaged blade immediately.12. Use only flanges specified for this tool.13. Be careful not to damage the arbor, flanges(especially the installing surface) or bolt. Damage

/ 120

Related manuals for Makita LS1013

Makita LS1013 Instruction Manual

This manual is suitable for:

LS1013 LS1013F LS1013FL LS1013L

manualsdatabase

Your AI-powered manual search engine