Makita LS1030N Instruction Manual

Also see for LS1030N: Instruction manual Instruction manual Parts Breakdown Instruction manual Instruction manual

Contents

7INSTALLATION Bench mountingWhen the tool is shipped, the handle is locked in the loweredposition by the stopper pin. Release the stopper pin by lower-ing the handle slightly and pulling the stopper pin.This tool should be bolted with two bolts to a level and stablesurface using the bolt holes provided in the tool’s base. Thiswill help prevent tipping and possible injury.FUNCTIONALDESCRIPTION CAUTION:• Always be sure that the tool is switched off andunplugged before adjusting or checking function on thetool.Blade guardWhen lowering the handle, the blade guard rises automati-cally. The guard is spring loaded so it returns to its originalposition when the cut is completed and the handle is raised.NEVER DEFEAT OR REMOVE THE BLADE GUARD ORTHE SPRING WHICH ATTACHES TO THE GUARD.In the interest of your personal safety, always maintain theblade guard in good condition. Any irregular operation of theblade guard should be corrected immediately. Check toassure spring loaded return action of guard. NEVER USETHE TOOL IF THE BLADE GUARD OR SPRING ARE DAM-AGED, FAULTY OR REMOVED. DOING SO IS HIGHLYDANGEROUS AND CAN CAUSE SERIOUS PERSONALINJURY.1. Stopper pin10017921. Bolt10018561. Blade guard1001860