Makita LS1040 Instruction Manual

Also see for LS1040: Instruction manual Instruction manual Parts Breakdown Instruction manual Instruction manual

Contents

24Lower the handle fully and lock it in the lowered positionby pushing in the stopper pin. Square the side of theblade with the face of the guide fence using a triangularrule, try-square, etc. Then securely tighten the hex boltson the guide fence in the order from the right side.2. Bevel angle(1) 0° bevel angleLower the handle fully and lock it in the loweredposition by pushing in the stopper pin. Loosen thelever at the rear of the tool.Loosen the hex nut and turn the 0° bevel angleadjusting bolt on the right side of the turn base twoor three revolutions clockwise to tilt the blade to theright.Carefully square the side of the blade with the topsurface of the turn base using the triangular rule,try-square, etc. by turning the 0° bevel angle adjust-ing bolt counterclockwise. Then tighten the hex nutto secure the 0° bevel angle adjusting bolt andtighten the lever securely.Make sure that the pointer on the turn base point to0° on the bevel scale on the arm. If it does not pointto 0°, loosen the screw which secures the pointerand adjust the pointer so that it will point to 0°.1. Triangular rule2. Grip3. Guide fence3120022591. Turn base2. Lever3. 0° adjusting bolt4. Hex nut24310017681. Triangular rule2. Saw blade3. Top surface of turn base1230018191. Arm2. Bevel scale3. Pointer4. Turn base1 2 34001769

/ 32

Related manuals for Makita LS1040

Makita LS1040 Instruction Manual

This manual is suitable for:

LS1040

manualsdatabase

Your AI-powered manual search engine