Makita LS1040 Instruction Manual

Also see for LS1040: Instruction manual Instruction manual Instruction manual Parts Breakdown Instruction manual

Contents

17Lower the handle fully and lock it in the lowered position by pushing inthe stopper pin. Square the side of the blade with the face of the guidefence using a triangular rule, try-square, etc. Then securely tighten thehex bolts on the guide fence in the order from the right side.2. Bevel angle(1) 0° bevel angleLower the handle fully and lock it in the lowered position by push-ing in the stopper pin. Loosen the lever at the rear of the tool.Loosen the hex nut and turn the 0° bevel angle adjusting bolt onthe right side of the turn base two or three revolutions clockwise totilt the blade to the right.Carefully square the side of the blade with the top surface of theturn base using the triangular rule, try-square, etc. by turning the0° bevel angle adjusting bolt counterclockwise. Then tighten thehex nut to secure the 0° bevel angle adjusting bolt and tighten thelever securely.Make sure that the pointer on the turn base point to 0° on the bevelscale on the arm. If it does not point to 0°, loosen the screw whichsecures the pointer and adjust the pointer so that it will point to 0°.1. Triangular rule2. Grip3. Guide fence3120022591. Arm2. Lever3. 0° adjusting bolt4. Hex nut24310017681. Triangular rule2. Saw blade3. Top surface of turn base1230018191. Arm2. Bevel scale3. Pointer4. Turn base1 2 34001769

/ 20

Related manuals for Makita LS1040

Makita LS1040 Instruction Manual

This manual is suitable for:

LS1040 LS1040S

manualsdatabase

Your AI-powered manual search engine