Makita RBL250 Original Instruction Manual

Also see for RBL250: Instruction manual Installation manual Original instruction manual Original instruction manual

Contents

14Checking the spark plugsUse only the supplied socket wrench to remove or install the spark plug.The gap between the two electrodes of the spark plug should be 0.60.7 mm (0.024” 0.028”). If the gap is too wide or too narrow, adjust it.If the spark plug is clogged with carbon or fouled, clean it thoroughly orreplace it.CAUTION: Never touch the spark plug connector while engine isrunning (danger of high voltage electric shock).––Cleaning of muffler exhaust portCheck muffler exhaust port (1) regularly.If it is clogged with carbon deposits, carefully scrape the deposits out witha suitable tool.––Any maintenance or adjustment work that has not been included and described in this manual is only to be performed by Authorized Service Agent.0.6 – 0.7 mm(0.024” – 0.028”)