4-3InstrumentationThe in-dash graphical display, the MaliView screen, gauges and digital switch lensesshould only be cleaned with a damp, soft cloth with mild, soapy water. Ammonia-basedor harsh chemical cleaners will damage the lenses.To care for the Malibu Touch Command, lightly wipe the surface of the touch screenusing a dry cloth or soft cloth with isopropyl alcohol or neutral detergent for cleaning thetouch screen in case of dirt or residue. Never use glass cleaners, which contain ammonia.Never use organic solvents on the touch screen, except alcohol.ExteriorYour Malibu boat is highly resistant to weathering, water pollution and minor scrapeswhich occur during normal use. However, regular care and maintenance of your boat is ageneral responsibility for all Malibu boat owners. By following the boat care instructionslisted below, you will be able to extend the life and beauty of your Malibu boat.HardwareMost of the metal hardware on your boat consists of brass, stainless steel, or aluminumand should be cleaned on a periodic basis with soap and water. In fresh water, metalfittings and hardware should be sprayed regularly with a rust inhibitor and after every usein saltwater.DO NOT use cleaners that are not intended for use on stainless steel. Glass, tile, counteror citrus cleaners can damage hardware permanently. Always follow cleaning, byapplying a high-quality metal polish or automotive wax after cleaning. Test products inan inconspicuous area before applying to the complete surface, especially if you are notfamiliar with the product.All metal parts, including but not limited to tower accessories, board racks or speakercans, should be cleaned with mild soap and water frequently and waxed periodically. Acorrosion protectant is highly recommended on these components, especially for use inareas of or in proximity to salt/brackish water. Pitting, corrosion or oxidation is notcovered under warranty. Pitting is not the same as separation.Fiberglass and GelcoatThe fiberglass hull and deck of your Malibu boat consist of a molded shell and exteriorgelcoat. The gelcoat protects the fiberglass shell and gives all Malibu boats a smooth andshiny surface. The following are some general instructions which will help you maintainyour boat’s sleek appearance:1) Wash monthly or more frequently, depending on use. Use a mild dish washingsoap and lukewarm or cold water. Rinse your boat with fresh water and wipedown immediately to avoid water spots.2) Wax the boat hull and deck after every three or four outings to decrease waterfriction and to lessen the potential for staining or spotting the gelcoat surface. Incases where the original gelcoat shine cannot be restored by waxing, hand buffthe surface using any commercial compound. Be sure to apply several coats ofwax over the area that has been polished.