Mamiya RZ67 PRO II Instructions Manual

Also see for RZ67: Instructions Instructions Instructions Instruction manual Instructions

Mamiya RZ67 PRO II Instructions Manual Manual pdf 12 page image

Mamiya RZ67 PRO II SpecificationsCamera Type :6 X 7 cm roll film SLR with lens shutter.Film Holder :120 Roll Film Holder HA703 ---the standard holder220 Roll Film Holder HB702 ] interchangeable6x4.5 120 Roll Film Holder RZPolaroid Pack Film Holder HP702Film type :120 film (120 Roll Film Holder HA703) (10 exposure) /120 film(6x4.5 120 Roll Film Holder RZ) (15 exposures) /220 film (220Roll Film Holder HB702) (20 exposure) / Instant film (PolaroidPack Film Holder HP702)Negative size:6x7 cm format: 56x69.5 mm / 6x4.5 cm format: 56x41.5 mm /Polaroid Pack: 70x70 mmRevolving Back: The back revolves 90° to change from the horizontal tovertical format or vice versa. Viewfinder format automaticallychanges as back revolves.Lens Mount :Special bayonet mount (with built-in safety lock)Lens type :110mm f/2.8---the Standard Lenses/ Interchangeable RZlenses/Interchangeable lenses for the RB can also be used.Shutter :Seiko #1 electronic shutterShutter release: Body shutter release plus electronic shutter release contacts.Shutter speed:1/400-8 sec. (with intermediate speeds), B, T (mechanical) /RBL (when the RB lens used) and AEF (when the AE PrismFinders used) positions / Mechanical shutter of 1/400 sec.usable.Sync operation: with flash sync terminal (X-sync) on lens or hot shoe.Multiple exposure: possible by means of R-M lever.Focusing Screen: Type A Matte is the standard / Focusing screens for the RZare interchangeable.Viewfinder :Waist-Level Finder FW702 is the standard interchangeable withthe AE Prism Finder FE701 / Finders for the RZ and RB can alsobe used.Percentage of the field of view visible:95% This information is based on alinear (horizontal / vertical) measurement.Film Transport:A single 114° stroke of the Cocking Lever advances the filmand Exposure Counter, sets the Mirror and Light Baffle, andcocks the shutter.10• Specifications and appearance are subject to change without notice.Focusing Method: The Rack and pinion focusing extends the built-in bellowsup to a maximum of 46 mm /Equipped with a Focusing Knoband Lock Lever/ With subject distance and exposure factorindications.Winder :RZ Winder II (RZ Winder I cannot be used)Cable release contact:The shutter can be released by mean of a cablerelease connected to a contact on the camera body / Remotecontrol is possible by means of a receiver connected to thesame contact.Battery Type: One alkaline-manganese battery (4LR44) or silver oxide Bat-tery (4SR44) to operate the body / Six AA size Ni-Cdbatteries or one special AC adapter (DC9V) for driving the winder.Safety features (in normal shutter release operation):• Viewfinder display (by LEDs and pictorial symbols):Warning on incomplete cocking lever setting / Warning on failureto pull out the dark slide / Battery check.• Electronic alarm sound when : The shutter speed dial is at the "RBL" positionwhen an RZ lens is used /The shutter dial is at the "AEF" positionwhen the AE Prism Finder is removed / The shutter speed dial isany other position than "RBL" when no lens is mounted or an RBlens is mounted on the camera / The battery power has dropped.• Release locked when : The cocking lever has been set incompletely / The darkslide has not been pulled out / The shutter speed dial is at the"RBL" position when an RZ lens is used /The shutter speed dial isat the "AEF" position when the AE Prism Finder is removed / Theshutter speed dial is at any other position than "RBL" when thereis no lens on the body or an RB lens is mounted on the camera.Dimensions :108 mm (width) X133.4 mm (height) X 211.5 mm (length).Weight :2,490g when the body (1,350g) (with Waist-Level Finder), 120Roll Film Holder (530g) and 110 mm f/2.8 lens (610g) arecombined.