n WarningFollow these precautions to prevent personal injurywhile operating or maintaining this equipment:• Read this manual thoroughly before operating,installing or performing maintenance on theequipment. Failure to follow instructions in thismanual can cause property damage, injury or death.• Crush/Pinch Hazard. Keep hands clear of movingcomponents. Components can move without warningunless power is disconnected and all potential energyis removed.• Moisture collecting on the floor will create a slipperysurface. Clean up any water on the floor immediatelyto prevent a slip hazard.• Objects placed or dropped in the bin can affecthuman health and safety. Locate and remove anyobjects immediately.• Never use sharp objects or tools to remove ice or frost.Do not use mechanical devices or other means toaccelerate the defrosting process.• When using cleaning fluids or chemicals, rubbergloves and eye protection (and/or face shield) mustbe worn.DANGERDo not operate equipment that has been misused,abused, neglected, damaged, or altered/modifiedfrom that of original manufactured specifications. Thisappliance is not intended for use by persons (includingchildren) with reduced physical, sensory or mentalcapabilities, or lack of experience and knowledge, unlessthey have been given supervision concerning use of theappliance by a person responsible for their safety. Donot allow children to play with, clean or maintain thisappliance without proper supervision.nWarningThis product is hermetically sealed and containsfluorinated greenhouse gas R410A.DANGERFollow these precautions to prevent personal injuryduring use and maintenance of this equipment:• It is the responsibility of the equipment owner toperform a Personal Protective Equipment HazardAssessment to ensure adequate protection duringmaintenance procedures.• Do Not Store Or Use Gasoline Or Other FlammableVapors Or Liquids In The Vicinity Of This Or Any OtherAppliance. Never use flammable oil soaked cloths orcombustible cleaning solutions for cleaning.• All covers and access panels must be in place andproperly secured when operating this equipment.• Risk of fire/shock. All minimum clearances must bemaintained. Do not obstruct vents or openings.• Failure to disconnect power at the main power supplydisconnect could result in serious injury or death.The power switch DOES NOT disconnect all incomingpower.• All utility connections and fixtures must bemaintained in accordance with the authority havingjurisdiction.• Turn off and lockout all utilities (gas, electric, water)according to approved practices during maintenanceor servicing.• Units with two power cords must be plugged intoindividual branch circuits. During movement, cleaningor repair it is necessary to unplug both power cords.• Never use a high-pressure water jet for cleaning onthe interior or exterior of this unit. Do not use powercleaning equipment, steel wool, scrapers or wirebrushes on stainless steel or painted surfaces.• Two or more people are required to move thisequipment to prevent tipping.• Locking the front casters after moving is the owner’sand operator’s responsibility. When casters areinstalled, the mass of this unit will allow it to moveuncontrolled on an inclined surface. These units mustbe tethered/secured to comply with all applicablecodes.• The on-site supervisor is responsible for ensuring thatoperators are made aware of the inherent dangers ofoperating this equipment.• Do not operate any appliance with a damaged cordor plug. All repairs must be performed by a qualifiedservice company.