© MuxLab Inc. 94-000795-A8495 Dalton Rd, Montreal, Quebec, Canada. H4T 1V5Tel: (514) 905-0588 Fax: (514) 905-0589Toll Free (North America): (877) 689-5228E-mail: videoease@muxlab.com URL: www.muxlab.comSpecificationsEnvironment Digital AudioStandard Supported LPCM, Dolby Digital® 5.1, DTS, and Dolby® True HDInput / Output signal S/PDIF coax cable or TOSLINK optic cable, input selectable.Sampling rate Up to 96kHz/24bitsMaximum distance betweenunit500 ft. (150m)Connectors RCA, TOSLINK, POWER, RJ45 on each unit.Power requirement 1W max, 5V DCS/PDIF spec Coax 75 ohm with RCA connector,level: 500mVp-p into 75 ohmTOSLINK spec Plastic optic cable with EIAJ/JEITA RC-5720C connector,Wavelength: red 660nm, level: -15dBm max.Cabling Requirement(not supplied)Any 4-pair straight cable CAT5/5E/6 with RJ-45 connector.Coax and second Optic Cable.Included in this kit 1 x TX unit, 1 x RX unit, 1 x 5V Power supply,1 x Optic Cable 3ft (1m) and 1 x Installation guide.RJ45 Pin Configuration Pair 4+5 (data), 1+2+7(+5V), 3+6+8(0V)Compatible mountinghardware500902, 500900, 500910, 500915Temperature Operating: -40° to 85°C (-40° to 185°F)Storage: -40° to 85°C (-40° to 185°F)Humidity Maximum 95% (non-condensing)Enclosure ABS UL94HB fire retardant plasticDimensions 2.25” x 2.25” x 1.0” (6 x 6 x 2.5 cm) each box.Shipping Weight 1 lb. (450g)Warranty 2 YearsOrder Information 500086 Digital Audio ExtenderDIGITAL AUDIO EXTENDER KIT500086Quick Installation GuideOverviewThe Digital Audio Extender allows one (1) source of digital audio signal: coax (S/PDIF)or optic (TOSLINK) to be connected to a receiver: coax or optic to up to 500 ft. (150m)in a point-to-point configuration. The Extender supports most standards to transmit twochannels of uncompressed lossless PCM audio or compressed 5.1/7.1 surround sound,such as Dolby Digital Plus or DTS-HD High Resolution Audio (multichannel digitalaudio Dolby Digital® 5.1, DTS, and Dolby® True HD).ApplicationsTransmission of Digital Audio Signal