MuxLab 500413 Installation & Operation Manual

Contents

MuxLab 500413 Installation & Operation Manual Manual pdf 12 page image

HDMI 8x8 Matrix Switch Kit, HDBT, PoC, 4K/60 Installation & Operation Manual© MuxLab Inc. 2019 12System Operations5.1. Front Panel Button ControlThe HDMI 8x8 Matrix Switch can be controlled via the front panel. Please follow thebasic programing instructions below:1. To connect one input to an output:Example: Input 1 to Output 3→ Press the Output 3 button until the Input 1 LED is ON2. To connect one input to several outputs:Example: Connect Input 2 to Output 3 and 4→ Press the Output 3 button until the Input 2 LED is ON→ Press the Output 4 button until the Input 2 LED is ON3. To connect an input to all the outputs:Example: Input 1 to all Outputs→ Press the Output 1 button until the Input 1 LED is ON→ Press the Output 2 button until the Input 1 LED is ON→ Press the Output 3 button until the Input 1 LED is ON→ Press the Output 4 button until the Input 1 LED is ONNote: LED Indicators of the pressed buttons above will blink green for three times ifthe connections were completed successfully, then the LED will switch OFF. If theconnection failed, they the LEDs will turn OFF immediately.