MuxLab 500413 Installation & Operation Manual

Contents

MuxLab 500413 Installation & Operation Manual Manual pdf 19 page image

HDMI 8x8 Matrix Switch Kit, HDBT, PoC, 4K/60 Installation & Operation Manual© MuxLab Inc. 2019 19since you will need to change it back later on.Step3. With the PC communicating to the web interface of the Matrix Switch, set theMatrix Switch’s network segment to the same as that of the Router or EthernetSwitch.Step4. Set the PC to the same network segment of the Router or Ethernet Switch. Ifthe original one was already the same as the Router or Ethernet Switch, thensimply return the PC’s network segment to its original one you recordedabove.Step5. Connect the Matrix Switch and PC(s) to the Router or Ethernet Switch. PC(s)within the LAN are able to then control the Matrix Switch through its web-interface GUI.5.3.5. Web-Interface GUI for TCP/IP controlThe 500413 supports a web-interface GUI for convenient TCP/IP control. The GUIallows users to interact with this Kit through graphical icons.Type http://192.168.1.239 in your browser, to bring up the web interface.The following provides a brief introduction to the interfaces.Sense Switch Screen: The matrix grid displays all possible connections between eachinput and output. Users can make connections by clicking on the corresponding gridbutton.See the screenshot below: