© MuxLab Inc. 94-000728-A SE-000728-A8495 Dalton Road, Mount Royal, Quebec, Canada. H4T 1V5Tel: (514) 905-0588 Fax: (514) 905-0589Toll Free (North America): (877) 689-5228E-mail: videoease@muxlab.com URL: www.muxlab.comSpecificationsEnvironment HDMI 1.3a (Supports the 3D feature of HDMI 1.4)Devices DVD, plasma, projectors, monitors, TV, PC, laptops, servers supportingHDMI.Transmission Transparent to the userBandwidth 340 MHzSignals HDMI 1.3a protocolConnectors One (1) HDMI receptacle.One (1) RJ45S for Cat 5e/6 unshielded or shielded twisted pair.Two (2) 3.5mm jacks for IR emitter and sensorNote: HDMI cables not included.Maximum DistanceBased on a maximumlength of 6.6 ft (2 m) ofHDMI cable per end.480i/p: Cat 5e/6: 230 ft (70 m)720p, 1080i: Cat 5e/6: 230 ft (70 m)1080p: Cat 5e/6: 230 ft (70 m)1080p Deep Color: Cat 5e/6: 230 ft (70 m)Note: When installed in an electrically noisy environment, an STP cablemust be used. Also, cross-connection reduces the effective distancedepending on the grade of twisted cable used.RJ45 Pin ConfigurationReverse PolaritySensitive. Use EIA/TIA568A or 586B straight-through wiring.RJ45 LinkPin 1 (R) Pin 2 (T)Pin 3 (R) Pin 6 (T)Pin 4 (R) Pin 5 (T)Pin 7 (R) Pin 8 (T)Cable One (1) Cat 5e/6 or better twisted pair cables requiredPower Supply Two (2) 110-240V/5VDC power supplies with interchangeable bladesPower Consumption Transmitter: 1.6 Watt Receiver: 3.2 WattTemperature Operating: 0° to 40°C Storage: -20° to 85°CHumidity: Up to 95% non-condensingEnclosure MetalDimensions 4.40” x 3.00” x 1.00” (11.2 x 7.6 x 2.5 cm)Shipping Weight 1.4 lb (0.6 kg)Compliance Regulatory: FCC, CE, RoHS Flammability: 94V0Warranty 2 yearsOrder Information 500451 HDMI Mono Extender Kit500451-RX HDMI Mono Receiver (for use with 50047x)HDMI Mono Extender Kit500451 (Kit) , 500451-RX (Receiver only)Quick Installation GuideOverviewThe HDMI Mono Extender Kit (500451) allows HDMI equipment to be connected up to230 ft (70 m) @ 1080p Deep Color via one (1) Cat 5e/6 unshielded twisted pair cablesin a point-to-point configuration. The kit comes with one (1) Transmitter and one (1)Receiver as well as an IR Emitter (500998) and IR Sensor (500999) for remote controlapplications. The 500451-RX is the receiver portion of the kit and is used inconjunction with MuxLab’s Multimedia Matrix Switch. For installation instructions,please refer to the Multimedia Matrix Switch Installation Guide.ApplicationsApplications include commercial and residential AV systems, classroom projectorsystems, digital signage, boardroom systems, collaborative PC systems, and medicalinformation systems.Installation1. Identify the connectors on the Transmitter and Receiver as indicated on theproduct labels.2. Verify that the distance between the HDMI Transmitter and Receiver is withinMuxLab specifications (see Specifications table).3. To install the Transmitter:3a. Connect the Transmitter to the HDMI video source with an HDMI compliant