© MuxLab Inc. 94-000747-A SE-000747-A8495 Dalton Road, Mount Royal, Quebec, Canada. H4T 1V5Tel: (514) 905-0588 Fax: (514) 905-0589Toll Free (North America): (877) 689-5228E-mail: videoease@muxlab.com URL: www.muxlab.comSpecificationsEnvironment HDMI 1.3a (Supports the 3D feature of HDMI 1.4)Devices DVD, plasma, projectors, monitors, TV, PC, laptops, servers supportingHDMI.Transmission Transparent to the userBandwidth 340 MHzSignals HDMI 1.3a protocolConnectors One (1) HDMI receptacle.One (1) RJ45S for Cat 5e/6 unshielded or shielded twisted pair.Two (2) 3.5mm jacks for IR emitter and sensorOne (1) DB9 Connector for RS-232Note: HDMI cables not included.Maximum DistanceBased on a maximumlength of 6.6 ft (2 m) ofHDMI cable per end.Cat 5e/6: 230 ft (70 m) up to 1080P Deep Color115 ft (35 m) for 4K; 3840 X 2160/24,25,30 HzNote: When installed in an electrically noisy environment, an STP cablemust be used. Also, cross-connection reduces the effective distancedepending on the grade of twisted cable used.RJ45 Pin ConfigurationReverse PolaritySensitive. Use EIA/TIA568A or 586B straight-through wiring.RJ45 LinkPin 1 (R) Pin 2 (T)Pin 3 (R) Pin 6 (T)Pin 4 (R) Pin 5 (T)Pin 7 (R) Pin 8 (T)Cable One (1) Cat 5e/6 or better twisted pair cable requiredPower Supply 500454: Two (2) 110-240V/5VDC power supplies with interchangeableblades500454-POE: One POE power supplyPower Consumption Transmitter: 1.6 Watt Receiver: 3.2 WattTemperature Operating: 0° to 40°C Storage: -20° to 85°CHumidity: Up to 95% non-condensingEnclosure MetalDimensions 4.40” x 3.00” x 1.00” (11.2 x 7.6 x 2.5 cm)Weight 1.4 lb (0.6 kg)Compliance Regulatory: FCC, CE, RoHS Flammability: 94V0Warranty 2 yearsOrder Information 500454 HDMI / RS232 Extender Kit500454-RX HDMI / RS232 Receiver500454-POE HDMI / RS232 Extender Kit with POE500454-POE-RX HDMI / RS232 Receiver with POEHDMI / RS232 Extender Kit500454 (Kit) , 500454-RX (Receiver only)500454-POE (Kit) , 500454-POE-RX (Receiver only)Quick Installation GuideOverviewThe HDMI / RS232 Extender Kit (500454 or 500454-POE) allows HDMI equipment tobe connected up to 230 ft (70 m) @ 1080p via one (1) Cat 5e/6 unshielded twisted paircable in a point-to-point configuration. The 500454 includes one (1) Transmitter andone (1) Receiver as well as an IR Emitter (500998) and IR Sensor (500999) for remotecontrol applications. The 500454-POE comes with one (1) power supply, as it does notrequire a power supply on the receiver side. The 500454-RX or 500454-POE-RXreceivers are used in conjunction with MuxLab’s HDMI Matrix Switch. For installationinstructions, please refer to the HDMI Matrix Switch Installation Guide.ApplicationsApplications include digital signage, commercial and residential AV systems, classroomprojector systems, boardroom systems, collaborative PC systems, and medicalinformation systems.Installation1. Identify the connectors on the Transmitter and Receiver as indicated on theproduct end panels.2. Verify that the distance between the HDMI Transmitter and Receiver is withinMuxLab specifications (see specifications table).3. To install the Transmitter:3a. Connect the Transmitter to the HDMI video source with an HDMI compliantcable.3b. Connect one (1) length of Cat 5e/6 (or higher) grade UTP cable to theRJ45 LINK connector on the Transmitter.