MuxLab 500459 Quick Installation Manual

MuxLab 500459 Quick Installation Manual Manual pdf 1 page image

© MuxLab Inc. 94-000863-A SE-000863-A8495 Dalton Road, Mount Royal, Quebec, Canada. H4T 1V5Tel: (514) 905-0588 Fax: (514) 905-0589Toll Free (North America): (877) 689-5228E-mail: videoease@muxlab.com URL: www.muxlab.comSpecificationsSpecification ChartEnvironment HDMI 2.0Devices DVDs, Blu-ray players, projectors, monitors, TVs, PCs, laptops, servers supporting HDMI.Transmission Transparent to the userSignals HDMI 2.0 protocolConnectorsCables not includedOne (1) HDMI receptacle.One (1) RJ45S for Cat5e/6 unshielded or shielded twisted pair.One (1) 3-Position Terminal Block for RS232.Two (2) 3.5mm sockets for IR Sensor & Emitter (carrier-wave).One (1) 2.1mm locking power connector.Max. Distance**Based on a maximum length of6.6 ft (2m) of HDMI cable per end4K/60 (4:4:4): Cat 5e/6: 131ft (40m)1080p: Cat 5e/6: 230ft (70m)When installed in an electrically noisy environment, STP cable must be used. Also, cross-connection reduces the effective distance depending on the grade of twisted cable used.RJ45 Pin ConfigurationUse EIA/TIA 568 A or B,straight-through wiring.RJ45Pin 1 (R) Pin 2 (T)Pin 3 (R) Pin 6 (T)Pin 4 (R) Pin 5 (T)Pin 7 (R) Pin 8 (T)Cable One (1) Category 5e or better twisted pair cables required.Power Supply One (1) 110-240V/12VDC @ 2A power supply with interchangeable blades.Power Consumption Transmitter: 10.44 Watts Receiver: 10.44 WattsTemperature Operating: 0º to 40º C. Storage:-20º to 85º C. Humidity: up to 95% non-condensing.Enclosure MetalUnit Dimensions 4.72” x 2.87” x 1.00” (12.0 x 7.3 x 2.5 cm)Shipping Weight 1.75 lbs (0.79 kg)Compliance Regulatory: FCC, CE, RoHSWarranty 2 yearsOrder Information 500459 HDMI/RS232 Extender Kit, HDBT, 4K/60 (UPC: 627699004593)HDMI/RS232 Extender Kit, HDBT, 4K/60500459Quick Installation GuideOverviewThe HDMI/RS232 Extender Kit, HDBT, 4K/60 (500459) allows HDMI equipment to beconnected up to 131ft (40m) at 4K/60 (4:4:4) resolutions, or 230ft (70m) at resolutionsup to 1080p via one (1) Cat 5e/6 unshielded twisted pair cable in a point-to-pointconfiguration. The unit supports RS232 and bidirectional IR pass through transmissionfor end device remote control. This product supports PoC, allowing the transmitter topower the receiver, or the receiver to power the transmitter. The kit includes one (1)transmitter, one (1) receiver, one (1) IR Emitter, one (1) IR sensor and one (1) powersupply.ApplicationsApplications include digital signage, commercial and residential AV systems, classroomprojector systems, boardroom systems, collaborative PC systems, and medicalinformation systems.Installation1. Identify the connectors on the Transmitter and Receiver as indicated on the productend panels above.2. Verify that the distance between the HDMI Transmitter and Receiver is withinMuxLab specifications (see specifications table).3. To install the Transmitter:3a. Connect the Transmitter to the HDMI video source with an HDMI compliantcable.3b. Connect one (1) length of Cat 5e/6 (or higher) grade UTP cable to theRJ45 LINK connector on the Transmitter.4. To install the Receiver:4a. Connect the Receiver to the HDMI display equipment with an HDMIcompliant cable.4b. Connect one (1) Cat 5e/6 cable, coming from the Transmitter, to the RJ45

/ 2

Related manuals for MuxLab 500459