MuxLab 500811 Operation Manual
Also see for 500811: Operation manualQuick installation guideQuick installation guide
                                                                                                                                                                                                                                    | |
Contents
| 
© MuxLab Inc. ProDigital Network Controller (MNC)Page 203.4. Ethernet Web Interface – Device ManagementThe Ethernet Web interface allows the user to manage the MNC and the AV over IPproduct family of extenders remotely from a Windows based computer. Make sure thecomputer is set to a Static IP address in the same subnet, which in our example is192.168.2.x. Follow steps 4, 5 & 6 in section 3.3 on how to accomplish this, but set usingthe subnet 192.168.2.xEnsure that the computer is connected by an Ethernet cable to the network router on whichthe MNC is physically installed. Open up an Internet browser (Explorer, Chrome,Firefox, etc.) and type in the MNC IP address in the address bar near the top of thescreen, such as, which in our example is 192.168.2.5:192.168.2.5/mnc/NOTE: 192.168.2.x represents the first three IP address entries of the network subneton which the MNC is physically installed.The MuxLab Network Controller Web interface Login Screen will appear (Figure 17).Figure 17 Login ScreenIn the User Name field, type admin. Use lower case.In the Password field, type admin. Use lower case.Click Log in.You are now ready to manage the MuxLab Pro Digital Network Controller. |
Related manuals for MuxLab 500811
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine