07iVECTOR Specification Data3.4 Noise LevelsThe iVECTOR has three different fan speeds. The lower the fanspeed, the lower the noise level. At the lowest fan speed, theunit operates almost silently. It is our quietest fan convector ever.The following table provides a comprehensive overview of noiselevels as tested in accordance with ISO 3741. For quietestoperation MYSON recommends sizing the iVECTOR based onnormal fan speed.Model Sound Power LwA (dB)iV60x080 31.9 44.8 55 24.8 37.7 47.9iV60x100 34.1 42.9 55 27 35.8 47.9iV60x120 31.1 44.7 58.8 24 40.5 51.7iV60x140 32 42.6 61.9 24.9 35.5 54.8iV60x160 34.1 42.1 63.4 27 35 56.3Normal Medium BoostSound Pressure (dBA) - at 2.5mNormal Medium Boost3.03.5 Hydronic ConnectionsThe iVECTOR is suitable for use on closed circulation, two pipe * ,pump assisted central heating systems or heating and coolingsystems. Not suitable for one pipe or microbore systems.Note: A pressure independent balancing and control valve isavailable for this product as an accessory. This valve can simplifysystem design by eliminating the possible need for largerbalancing valves elsewhere in the system, and will maintain theflow in the unit to the required levels.* Pipes should be sized using flow rate and pressure losses.No microbore pipework3.6 Weight, Water Content and Motor PowerModel MotorPower (w)WaterContent (l)UnpackedWeight (kg)iV60x080 32 0.66 22.8iV60x100 35 0.92 27.7iV60x120 45 1.19 32.5iV60x140 53 1.45 37.5iV60x160 65 1.72 42.63.3 Flow Rates/Pressure Losses100 69 104 145 163 191150 145 213 291 325 380220 293 421 565 625 728330 619 866 1140 1250 1447500 1328 1812 2338 2542 2926750 2800 3728 4713 5082 5817Pressure Drop (mm wg)Flow(l/h) iV60x080 iV60x100 iV60x120 iV60x140 iV60x160100 675 1015 1418 1594 1877150 1423 2088 2859 3187 3731220 2878 4127 5543 6131 7140330 6067 8489 11176 12257 14194500 13026 17775 22926 24929 28700750 27459 36559 46221 49837 57051Pressure Drop (Pa)Flow(l/h) iV60x080 iV60x100 iV60x120 iV60x140 iV60x160