NAD T 758 Owner's Manual

Also see for T 758: Owner's manual Quick setup guide Installation guide Quick setup guide

NAD T 758 Owner's Manual Manual pdf 8 page image

1 HT 2/SURR-B HT 1/SURR-B• Connect HT 2/SURR-B and/or HT 1/SURR-B to the audio input of anexternal power amplifier hooked up with up to 4 Height speakers.2 USB• Connect the USB connector of the supplied BluOS/USB hub to thisUSB input. Ensure that the Wi-Fi dongle and Bluetooth USB MicroAdaptor are securely connected to any of the 4 ports of the USBhub. If wireless connectivity is poor, connect Wi-Fi dongle to thesupplied extension cable and straighten out for better reception.• Refer to the instructions on HOW TO SETUP WIRELESS CONNECTIONin the BluOS SETUP menu below.3 7.1 CH INPUT• Connect to the corresponding analog audio output of amultichannel source component such as a DVD-Audio ormultichannel-SACD player or external multichannel decoder (disccopy protected formats only allow analog signal transfer). Typically,these sources will produce 5.1-channel output, in which case theSurround Back jacks are left unconnected. The signal present atthese jacks can be heard by selecting Source 7 (7.1 CHANNEL INPUTis defaulted to this Source).• There is no bass-management or other processing (other thanmaster-volume control) available to this 7.1 channel input.• While the multichannel audio output of a DVD/BD player can beconnected to these jacks, using the T 758’s own Dolby Digital andDTS decoding and digital-analog converters via a digital connectionwill usually produce superior results.4 AUDIO 1 - 3• These comprise the T 758’s other sets of principal input. Connectthese analog audio input ports to the corresponding audio outputports of source components such as CD players or other line levelaudio sources.5 ZONE 2• Send zone selected audio source to the corresponding audio inputof a separately located additional amplifier or receiver (not supplied)that can power its matching set of speakers.• Use high quality patch cables to reduce noise pickup over longdistance runs.IDENTIFICATION OF CONTROLSREAR PANEL© NAD T 758BACK/FRONT/ZONE 2/HT 1/HT 2BACK/FRONT/ZONE 2/HT 1/HT 27.1 CH INPUTAUDIO 1FRONT CENTER SURR SURR-B AUDIO 2 AUDIO 3 ZONE 2 IR INIR OUT2BACK/FRONT/ZONE 2/HT 1/HT 21SWITCHED AC OUTLET120V 60Hz 100W 1A MAX120V 60HzUSB/HDMIAUDIOPRE-OUTHEIGHT 2/SURR-B HEIGHT 1/SURR-B OPTICAL COAXIAL2 12 1L RLHDMI OUT (4K) HDMI IN 3USB HDMI IN 2 HDMI IN 1RDIGITALAUDIO INTRIG OUT +12VATTENTION!Please make sure that the T 758 is powered off or unplugged from the mains power source before making any connections. It is also advisable to powerdown or unplug all associated components while making or breaking any signal or AC power connections.3124135 6 7 811021198ENGLISH PORTUGUÊSFRANÇAIS ESPAÑOL ITALIANO DEUTSCH NEDERLANDS SVENSKA РУССКИЙ