NAD T785 Owner's Manual

Also see for T785: Catalog Specification sheet Specifications Owner's manual Owner's manual

NAD T785 Owner's Manual Manual pdf 12 page image

ABOUT THE ON-SCREEN DISPLAY (OSD)The T 785 employs a simple, self-explanatory system of on-screen display “menus” that will appearon the connected video monitor/TV. These are required during the setup process (and are usefulin day-to-day operation), so be sure to connect the monitor/TV before proceeding with setup.DISPLAY THE OSDPress either [ ] or [ENTER] buttons of the HTRC 1 remote control or front panel to display the T 785’s MainMenu on your video monitor/TV. If the OSD does not appear, check your MONITOR OUT connections.NAVIGATING THE OSD AND MAKING CHANGESTo navigate through the OSD menu options, please do the following using the HTRC 1 orcorresponding front panel buttons:1 Press [ ] or [ENTER] to select a menu item. Use [ ] keys or in some cases, [ENTER] to move up ordown the Menu selections. Repeatedly press [ ] to advance or go further into sub-menus of a desiredmenu item.2 Use [ ] keys to set or change the parameter value (setting) of a menu item.3 Press [ ] to save the settings or changes done on the current menu or sub-menu. Pressing [ ]will also return the user to the previous menu or exit from a particular menu.MAIN MENUThe Main Menu contains the menu options for “Listening Mode”, “DSP Options”, “Tone Controls”, “ZoneControls” and access to “Setup Menu”.To navigate through these Main Menu options and their sub-menu selections, please refer to andfollow the directions stated in the sections “DISPLAY THE OSD” and “NAVIGATING THE OSD ANDMAKING CHANGES”.NOTEThe individual configurations set forth at “Listening Mode”, “DSP Options” and “Tone Controls”are carried over whenever they are enabled during A/V Preset setting. Please see the section “A/VPRESETS” for reference.LISTENING MODEThe T 785 offers nine distinct listening modes, tailored for different types of recording or programmaterial. With a two-channel (Stereo) source, the following listening modes can be selected:STEREOAll output is directed to the front left/right channels. Low frequencies are directed to the subwooferif one is present in the Speaker settings. Select “Stereo” when you wish to listen to a stereo (ormonaural) production, such as music CD or FM broadcast, without surround enhancement. Stereorecordings whether in PCM/digital or analog form and whether surround-encoded or not encoded,are reproduced as recorded. Multi-channel digital recordings (Dolby Digital and DTS) are reproduced in“Stereo Downmix” mode via the front left/right channels only as Lt/Rt (left/right-total) signals.PRO LOGICTwo-channel recordings, whether stereo or surround-encoded, are reproduced with Dolby ProLogic surround processing, yielding output to front left/right, center and discrete left/right surroundchannels (assuming these are present in the current “Speaker Configuration”). The surround channel ismonophonic, but it is reproduced in both surround speakers.OPERATIONUSING THE T 785 – MAIN MENU1ENGLISH FRANÇAIS ESPAÑOL ITALIANO DEUTSCH NEDERLANDS SVENSKA РУССКИЙ