NAD T785 Owner's Manual

Also see for T785: Catalog Specification sheet Specifications Owner's manual Owner's manual

NAD T785 Owner's Manual Manual pdf 38 page image

MODE: The following backlight modes are available:• Off: The backlight will never come ON.• Sense: The backlight will only come ON if the light sensor detects lowlight conditions. See also“SENSE LEVEL” discussion below.• On: The backlight will come ON any time a key is pressed.SENSE LEVEL (Sen Lvl): The point where the backlight comes ON in adarkened room. To set this level, go to a dim area where you think thebacklight should be activated given such a dark environment condition.Then, press [ENTER] at “B Light – Sen Lvl” menu. The display will show thecurrent sensitivity level. An example is belowIf such sensitivity level is alright with you, press [ENTER].Select “YES” to complete the setting of the sensitivity level.LIBRARYThe HTRC 1 can store a different library of default NAD codes for each ofits DEVICE SELECTOR “pages.” If the original default library does not controlyour NAD CD player, DVD player, or other component, follow the procedurebelow to change the library code. Please refer as well to the table below fora list of uploaded NAD Library Codes.Example: Load NAD DVD Player T 585 library codes to HTRC 1’s “DVD”device.1 Press [DVD] in the DEVICE SELECTOR page.2 Press and hold [TUNER (10+/SETUP)] and [ENTER] buttons. Use [ ] toscroll to “Library”.3 Press [ENTER].4 The library code for NAD T585 is “600”. Use [ ] to toggle to “600”. Press[ENTER].5 Use [ ] to select between “No” (desired library code is notuploaded) and “Yes” (desired library code is uploaded and saved to theapplicable device page.NOTEInstead of scrolling through the library list, you can also key-in directlythe library code based on the list of Library Codes below.LIBRARY CODE NAD PRODUCTDESCRIPTION LIBRARY CODE NAD PRODUCTDESCRIPTION100 Receiver/Processor(Discrete ON/OFF) 301 L75, L76 Tuner101 Receiver/Processor(Toggle ON/OFF) 302 L70 Tuner102 S170 303 L53 Tuner103 L75 304 L73 Tuner104 Second ZoneCommands 305 C425105 L70 306 C445106 L76 307 Txx5 Series Tuner107 118 400 Tape Deck B108 L53 401 TAPE Deck A109 L73 500 TV 280110 Stereo Receiver/Amplifier 501 MR13111 Stereo Second Zone 502 MR20112 Txx5 Series 503 PMR45200 CD Player 600 T535, T562, T585,M55201 CD Player (old) 601 T550, L55202 5170, 5240, 5340 602 T512, T531, T532,T571, T572203 5325 603 L70, L73 DVD204 5060 604 L56205 M5 605 T513, T514, T515,T524, T533, T534300 Tuner 606 L53 DVDLEARNThis function allows you to learn IR commands from another remote.Example: Learning “MENU” function from a TV remote control into theMENU button of HTRC 1’s TV device.Begin by positioning the HTRC 1 “nose-to-nose” with the source remote sothat the two devices’ infrared windows are about 2 inches apart.1 Press [TV] in the DEVICE SELECTOR page.2 Press and hold [TUNER (10+/SETUP)] and [ENTER] buttons. Use [ ] toscroll to “Learn”.OPERATIONUSING THE HTRC 1 REMOTE CONTROL8ENGLISH FRANÇAIS ESPAÑOL ITALIANO DEUTSCH NEDERLANDS SVENSKA РУССКИЙ