NAIM SUPERUNITI - Manual

Also see for SUPERUNITI -: Connection guide Guide Supplement Reference manual Quick start guide Quick start guide

NAIM SUPERUNITI - Manual Manual pdf 12 page image

104.2 The Language MenuThe Language setup menuenables the SuperUniti userinterface language to bechanged. Enter setup modeand use the handset ok/list keyto select Language. Use thehandset up (5) and down (6) and ok/list keys to select alanguage. Exit setup mode by pressing the exit key.4.3 The Inputs MenuThe Inputs setup menu enablesa variety of parameters to bespecified for each SuperUnitiinternal source and externalinput. These parameters definehow control of SuperUniti inputsbehaves. The options availablefor each are described inthe following sections. Threeparameters are common to allinputs:Enabled: Switches the input on oroff and displays or hides any associated menus.Name: Enables user specified names to be attached toinputs. Use the handset to enter text.Input Trim: Enables the relative level of each input tobe adjusted so that each is of an approximately equalvolume. Adjust using the handset 6 or 5 key.4.3.1 FM InputParameter OptionsEnabled: Yes / NoName: User definableInput Trim: ±10dBSeek Lock: Medium / High.Sets the FM signal strength required for theSuperUniti tuner to identify an FM station.SuperUniti Setup4 SuperUniti SetupOnce SuperUniti is installed with mains power, speakers and all external connectionsmade, it can be switched on and set up for use.The degree to which you modify SuperUniti’s default settings will depend upon the usesto which you put it and the extent to which you use its capabilities. It may be that youhave no need to modify the default settings at all, however we would encourage you toread this section of the manual in order that you gain a full understanding of SuperUniti’scapabilities. The following paragraphs describe each SuperUniti setup menu in turnstarting with the setup home menu.Enter SuperUniti setup mode by pressing the handset setup ( ) key or pressing andholding the front panel ok/list key. Navigate around the setup menus using the front panelor handset arrow keys and make selections using the ok/list key. Exit setup by pressingthe exit keys.4.1 The Setup Home MenuThe SuperUniti setup home menuprovides access to eleven setupmenus. The function of eachmenu is as follows:Language: Enables theSuperUniti userinterface language to be changed.Inputs: Enables various parameters for eachinternal and external input to beconfigured.Speakers: Configures SuperUniti speaker outputoptions.Headphones: Configures SuperUniti headphone outputoptions.Network Settings: Configures SuperUniti network connectionsettings.Digital Output: Configures SuperUniti digital outputsettings.Front Display: Configures SuperUniti display features.Clock & Alarm: Configures clock and alarm.Handset Keys: Enables SuperUniti inputs to be assignedto specific handset keys. Also enablesconfiguration of the handset navigation(3456) keys.SystemAutomation: Enables system automation to beconfigured.Factory Settings: Enables interrogation of SuperUniti status,deletion of all user presets and return tofactory default settings.Each of the eleven setup menus is described in detail inthe following sections. Use the handset up (5) and down(6) and ok/list keys to select a setup menu.Setup 1/114LanguageInputsSpeakersHeadphonesLanguage 1/74EnglishFrançaisDeutschItalianoSelect Input 1/144FMDABiRadioUPnPFM 1/44Enabled: YesName: FMInput Trim: 0Seek Lock: MediumFM 4/4Enabled: YesName: FMInput Trim: 04Seek Lock: Medium